Repairs in Canada & USA · Parts shipped worldwide

info@automiqautomation.com+1 343-507-0006BrochureLine CardFree evaluation on every repair
AutomIQ Automation & Drive Services
AboutContact
Request a QuoteRequest a Repair
AutomIQ Automation & Drive Services
Home

Shop by category

Servo DrivesServo MotorsEncodersHMIs & Operator PanelsPLCs & I/OPower SuppliesCNC ControlsLegacy & ObsoleteSensorsSafety EquipmentGearboxesPneumatics & HydraulicsOther PartsAll parts

Shop by manufacturer

SiemensAllen-BradleyRexroth IndramatFanucYaskawaMitsubishi ElectricABBSchneider ElectricOmronBeckhoffKollmorgenLenzeAll manufacturers A–Z
View all shop parts
Servo Drive RepairServo Motor RepairEncoder Repair & AlignmentHMI RepairPLC RepairPower Supply RepairCNC Control RepairExchange Program
View all repair services
SiemensAllen-BradleyRexroth IndramatFanucYaskawaMitsubishi ElectricABBSchneider ElectricOmronBeckhoffLenzeKollmorgenBaldorParkerMoogPro-face
View all brands
AutomotivePackagingPlastics & ThermoformingFood & BeverageMetalworking & CNCPrintingPharmaceuticalMaterial Handling
View all industries

Learn

Fault Code LibraryBlog & GuidesGlossaryFAQs

Tools

Downtime Cost CalculatorRepair or Replace AdvisorPart Number CheckerModel Code Decoder

Working With Us

Repair ProcessHow to Ship Us a UnitService AreasInternational OrdersOn-site ServiceSell Your SurplusWarranty, Terms & Privacy
View all resources
AboutContact
Request a RepairRequest a Quote
  1. Home
  2. Fault Codes
  3. SINAMICS S120
S

SINAMICS S120 Fault Codes & Alarms

All 1,484 codes. SINAMICS S120 and S150 faults (F), alarms (A) and safety messages (C), with plain-English guides for the faults that most often mean a repair: power unit, infeed, motor and encoder faults.

SINAMICS S120 fault codes
CodeNameAreaGuide
F01000Internal software errorControl Unit
F01001FloatingPoint exceptionControl Unit
F01002Internal software errorControl Unit
F01003Acknowledgment delay when accessing the memoryControl Unit
N01004Internal software errorControl Unit
F01005Firmware download for DRIVE-CLiQ component unsuccessfulControl Unit
A01006Firmware update for DRIVE-CLiQ component requiredControl Unit
A01007POWER ON for DRIVE-CLiQ component requiredControl Unit
A01009CU: Control module overtemperatureControl Unit
F01010Drive type unknownControl Unit
F01011Download interruptedControl Unit
F01012Project conversion errorControl Unit
A01013CU: Fan operating time reached or exceededControl Unit
F01014Topology: DRIVE-CLiQ component property changedControl Unit
F01015Internal software errorControl Unit
A01016Firmware changedControl Unit
A01017Component lists changedControl Unit
A01020Writing to RAM disk unsuccessfulControl Unit
F01023Software timeout (internal)Control Unit
F01030Sign-of-life failure for master controlControl Unit
F01031Sign-of-life failure for OFF in REMOTEControl Unit
A01032ACX: all parameters must be savedControl Unit
F01033Units changeover: Reference parameter value invalidControl Unit
F01034Units changeover: Calculation parameter values after reference value change unsuccessfulControl Unit
A01035ACX: Parameter back-up file corruptedControl Unit
F01036ACX: Parameter back-up file missingControl Unit
F01038ACX: Loading the parameter back-up file unsuccessfulControl Unit
F01039ACX: Writing to the parameter back-up file was unsuccessfulControl Unit
F01040Save parameter settings and carry out a POWER ONControl Unit
F01041Parameter save necessaryControl Unit
F01042Parameter error during project downloadControl Unit
F01043Fatal error at project downloadControl Unit
F01044CU: Descriptive data errorControl Unit
A01045CU: Configuring data invalidControl Unit
A01049CU: It is not possible to write to fileControl Unit
F01050Memory card and device incompatibleControl Unit
F01054CU: System limit exceededControl Unit
F01055CU: Internal error (SYNO of port and application not identical)Control Unit
F01056CU: Internal error (clock cycle of parameter group already assigned differently)Control Unit
F01057CU: Internal error (different DRIVE-CLiQ type for the slave)Control Unit
F01058CU: Internal error (slave missing in topology)Control Unit
F01059CU: Internal error (port does not exist)Control Unit
F01060CU: Internal error (parameter group not available)Control Unit
F01061CU: Internal error (application not known)Control Unit
F01063CU: Internal error (PDM)Control Unit
A01064CU: Internal error (CRC)Control Unit
F01068CU: Data memory memory overflowControl Unit
A01069Parameter backup and device incompatibleControl Unit
F01070Project/firmware is being downloaded to the memory cardControl Unit
F01072Memory card restored from the backup copyControl Unit
A01073POWER ON required for backup copy on memory cardControl Unit
F01082Parameter error when powering up from data backupControl Unit
A01097NTP server cannot be accessedControl Unit
A01099UTC synchronization tolerance violatedControl Unit
A01100CU: Memory card withdrawnControl Unit
F01105CU: Insufficient memoryControl Unit
F01106CU: Insufficient memoryControl Unit
F01107CU: Save to memory card unsuccessfulControl Unit
F01110CU: More than one SINAMICS G on one Control UnitControl Unit
F01111CU: Mixed operation of drive units illegalControl Unit
F01112CU: Power unit not permissibleControl Unit
F01120Terminal initialization has failedControl Unit
F01122Frequency at the measuring probe input too highControl Unit
F01123Power unit does not support digital inputs/outputsControl Unit
F01150CU: Number of instances of a drive object type exceededControl Unit
F01151CU: Number of drive objects of a category exceededControl Unit
F01152CU: Invalid constellation of drive object typesControl Unit
F01200CU: Time slice management internal software errorControl Unit
F01205CU: Time slice overflowControl Unit
F01221CU: Basic clock cycle too lowControl Unit
F01222CU: Basic clock cycle too low (computing time for communication not available)Control Unit
A01223CU: Sampling time inconsistentControl Unit
A01224CU: Pulse frequency inconsistentControl Unit
F01250CU: CU-EEPROM incorrect read-only dataControl Unit
A01251CU: CU-EEPROM incorrect read-write dataControl Unit
F01255CU: Option Board EEPROM read-only data errorControl Unit
A01256CU: Option Board EEPROM read-write data errorControl Unit
F01260Software not releasedControl Unit
F01275Hardware description errorControl Unit
A01276Hardware description not fully compatibleControl Unit
A01302Error in the component traceControl Unit
F01303Component does not support the required functionControl Unit
A01304Firmware version of DRIVE-CLiQ component is not up-to-dateControl Unit
F01305Topology: Component number missingControl Unit
A01306Firmware of the DRIVE-CLiQ component being updatedControl Unit
A01314Topology: Component must not be presentControl Unit
A01317Deactivated component again presentControl Unit
A01318BICO: Deactivated interconnections presentControl Unit
A01319Inserted component not initializedControl Unit
A01320Topology: Drive object number does not exist in configurationControl Unit
A01321Topology: Drive object number does not exist in configurationControl Unit
A01322Topology: Drive object number present twice in configurationControl Unit
A01323Topology: More than two partial lists createdControl Unit
A01324Topology: Dummy drive object number incorrectly createdControl Unit
F01325Topology: Component number not present in target topologyControl Unit
A01330Topology: Quick commissioning not possibleControl Unit
A01331Topology: At least one component not assigned to a drive objectControl Unit
F01340Topology: Too many components on one lineControl Unit
F01341Topology: Maximum number of DRIVE-CLiQ components exceededControl Unit
F01354Topology: Actual topology indicates an illegal componentControl Unit
F01355Topology: Actual topology changedControl Unit
F01356Topology: There is a defective DRIVE-CLiQ componentControl Unit
F01357Topology: Two Control Units identified on the DRIVE-CLiQ lineControl Unit
A01358Topology: Line termination not availableControl Unit
F01359Topology: DRIVE-CLiQ performance not sufficientControl Unit
F01360Topology: Actual topology not permissibleControl Unit
A01361Topology: Actual topology contains SINUMERIK and SIMOTION componentsControl Unit
A01362Topology: Topology rule(s) brokenControl Unit
F01375Topology: Connection duplicated between two componentsControl Unit
F01380Topology: Actual topology EEPROM defectiveControl Unit
A01381Topology: power unit incorrectly insertedControl Unit
A01382Topology: Sensor Module incorrectly insertedControl Unit
A01383Topology: Terminal Module incorrectly insertedControl Unit
A01384Topology: DRIVE-CLiQ Hub Module incorrectly insertedControl Unit
A01385Topology: Controller Extension incorrectly insertedControl Unit
A01386Topology: DRIVE-CLiQ component incorrectly insertedControl Unit
A01389Topology: Motor with DRIVE-CLiQ incorrectly insertedControl Unit
A01416Topology: Component additionally insertedControl Unit
A01420Topology: Component differentControl Unit
A01425Topology: Serial number differentControl Unit
A01428Topology: Incorrect connection usedControl Unit
F01451Topology: Target topology is invalidControl Unit
A01481Topology: power unit not connectedControl Unit
A01482Topology: Sensor Module not connectedControl Unit
A01483Topology: Terminal Module not connectedControl Unit
A01484Topology: DRIVE-CLiQ Hub Module not connectedControl Unit
A01485Topology: Controller Extension not connectedControl Unit
A01486Topology: DRIVE-CLiQ component not connectedControl Unit
A01487Topology: Option slot component not insertedControl Unit
A01489Topology: motor with DRIVE-CLiQ not connectedControl Unit
A01507BICO: Interconnections to inactive objects presentControl Unit
A01508BICO: Interconnections to inactive objects exceededControl Unit
F01510BICO: Signal source is not float typeControl Unit
F01511BICO: Interconnection with different scalingsControl Unit
F01512BICO: No scaling availableControl Unit
F01513BICO: Interconnection cross DO with different scalingsControl Unit
A01514BICO: Error when writing during a reconnectControl Unit
F01515BICO: Writing to parameter not permitted as the master control is activeControl Unit
A01590Drive: Motor maintenance interval expiredControl Unit
F01600SI P1 (CU): STOP A initiatedControl Unit
F01611SI P1 (CU): Defect in a monitoring channelControl Unit
F01612SI P1 (CU): STO inputs for power units connected in parallel differentControl Unit
N01620SI P1 (CU): Safe Torque Off activeControl Unit
N01621SI P1 (CU): Safe Stop 1 activeControl Unit
F01625SI P1 (CU): Sign-of-life error in safety dataControl Unit
F01630SI P1 (CU): Brake control errorControl Unit
A01631SI P1 (CU): motor holding brake/SBC configuration not practicalControl Unit
F01632SI P1 (CU): shutoff valve control/feedback signal errorControl Unit
F01640SI P1 (CU): component replacement identified and acknowledgment/save requiredControl Unit
F01641SI P1 (CU): component replacement identified and save requiredControl Unit
F01649SI P1 (CU): Internal software errorControl Unit
F01650SI P1 (CU): Acceptance test requiredControl Unit
F01651SI P1 (CU): Synchronization safety time slices unsuccessfulControl Unit
F01652SI P1 (CU): Illegal monitoring clock cycleControl Unit
F01653SI P1 (CU): PROFIBUS/PROFINET configuration errorControl Unit
A01654SI P1 (CU): Deviating PROFIsafe configurationControl Unit
F01655SI P1 (CU): Align monitoring functionsControl Unit
F01656SI CU: Parameter monitoring channel 2 errorControl Unit
F01657SI P1 (CU): PROFIsafe telegram number invalidControl Unit
F01658SI P1 (CU): PROFIsafe telegram number differControl Unit
F01659SI P1 (CU): Write request for parameter rejectedControl Unit
F01660SI P1 (CU): Safety-related functions not supportedControl Unit
F01661SI P1 (CU): Simulation of the safety inputs activeControl Unit
F01663SI P1 (CU): Copying the SI parameters rejectedControl Unit
F01664SI P1 (CU): No automatic firmware updateControl Unit
F01665SI P1 (CU): System is defectiveControl Unit
A01666SI Motion P1 (CU): Steady-state (static) 1 signal at the F-DI for safe acknowledgmentControl Unit
A01669SI Motion: Unfavorable combination of motor and power unitControl Unit
F01670SI Motion: Invalid parameterization Sensor ModuleControl Unit
F01671SI Motion: Parameterization encoder errorControl Unit
F01672SI P1 (CU): Motor Module software/hardware incompatibleControl Unit
F01673SI Motion: Sensor Module software/hardware incompatibleControl Unit
F01674SI Motion P1 (CU): Safety function not supported by PROFIsafe telegramControl Unit
F01675SI Motion P1: settings in the PROFIBUS/PROFINET controller not permissibleControl Unit
F01679SI CU: Safety parameter settings and topology changed, warm restart/POWER ON requiredControl Unit
F01680SI Motion P1 (CU): Checksum error safety monitoring functionsControl Unit
F01681SI Motion P1 (CU): Incorrect parameter valueControl Unit
F01682SI Motion P1 (CU): Monitoring function not supportedControl Unit
F01683SI Motion P1 (CU): SOS/SLS enable missingControl Unit
F01684SI Motion P1 (CU): Safely-Limited Position limit values interchangedControl Unit
F01685SI Motion P1 (CU): Safely-Limited Speed limit value too highControl Unit
F01686SI Motion: Illegal parameterization cam positionControl Unit
F01687SI Motion: Illegal parameterization modulo value SCA (SN)Control Unit
F01688SI Motion CU: Actual value synchronization not permissibleControl Unit
C01689SI Motion: Axis re-configuredControl Unit
F01690SI Motion: Data save problem for the NVRAMControl Unit
A01691SI Motion: Ti and To unsuitable for DP cycleControl Unit
F01692SI Motion P1 (CU): Parameter value not permitted for encoderlessControl Unit
A01693SI P1 (CU): Safety parameter setting changed, warm restart/POWER ON requiredControl Unit
F01694SI Motion CU: Firmware version Motor Module/Hydraulic Module older Control UnitControl Unit
A01695SI Motion: Sensor Module was replacedControl Unit
A01696SI Motion: Test stop for the motion monitoring functions selected when bootingControl Unit
A01697SI Motion: Test stop for motion monitoring functions requiredControl Unit
A01698SI P1 (CU): Commissioning mode activeControl Unit
A01699SI P1 (CU): Test stop for STO requiredControl Unit
C01700SI Motion P1 (CU): STOP A initiatedControl Unit
C01701SI Motion P1 (CU): STOP B initiatedControl Unit
C01706SI Motion P1 (CU): SAM/SBR limit exceededControl Unit
C01707SI Motion P1 (CU): Tolerance for safe operating stop exceededControl Unit
C01708SI Motion P1 (CU): STOP C initiatedControl Unit
C01709SI Motion P1 (CU): STOP D initiatedControl Unit
C01710SI Motion P1 (CU): STOP E initiatedControl Unit
C01711SI Motion P1 (CU): Defect in a monitoring channelControl Unit
C01712SI Motion P1 (CU): Defect in F-IO processingControl Unit
C01714SI Motion P1 (CU): Safely-Limited Speed exceededControl Unit
C01715SI Motion P1 (CU): Safely-Limited Position exceededControl Unit
C01716SI Motion P1 (CU): Tolerance for safe motion direction exceededControl Unit
C01717SI Motion P1 (CU): SLA limit exceededControl Unit
C01730SI Motion P1 (CU): Reference block for dynamic Safely-Limited Speed invalidControl Unit
C01745SI Motion P1 (CU): Checking braking torque for the brake testControl Unit
C01750SI Motion P1 (CU): Hardware fault safety-relevant encoderControl Unit
C01751SI Motion P1 (CU): Effectivity test fault safety-relevant encoderControl Unit
C01752SI Motion P1 (CU): reference position invalidControl Unit
C01770SI Motion P1 (CU): Discrepancy error of the failsafe inputs/outputsControl Unit
A01772SI Motion P1 (CU): Test stop for failsafe digital outputs runningControl Unit
F01773SI Motion P1 (CU): Test stop failsafe digital output errorControl Unit
A01774SI Motion P1 (CU): Test stop for failsafe digital outputs requiredControl Unit
A01780SBT When selected, the brake is closedControl Unit
A01781SBT brake opening time exceededControl Unit
A01782SBT brake test incorrect controlControl Unit
A01783SBT brake closing time exceededControl Unit
A01784SBT brake test canceled with faultControl Unit
A01785SBT brake test configuration errorControl Unit
F01786SCC signal source changedControl Unit
F01787SBT motor type differentControl Unit
A01788SI: Automatic test stop waits for STO deselection via motion monitoring functionsControl Unit
A01789SI: Automatic test stop and brake test when test stop is selected not permittedControl Unit
A01794SI Motion: check modulo value for safe position via PROFIsafeControl Unit
A01795SI Motion P1 (CU): Wait time after exiting the safe pulse cancellation expiredControl Unit
A01796SI P1 (CU): Wait for communicationControl Unit
C01797SI Motion P1 (CU): Axis not safely referencedControl Unit
C01798SI Motion P1 (CU): Test stop for motion monitoring functions runningControl Unit
C01799SI Motion P1 (CU): Acceptance test mode activeControl Unit
F01800DRIVE-CLiQ: Hardware/configuration errorControl Unit
A01839DRIVE-CLiQ diagnostics: cable fault to the componentControl Unit
A01840SMI: Component found without motor dataControl Unit
A01900PB/PN: Configuration telegram errorControl Unit
A01902PB/PN: clock cycle synchronous operation parameterization not permissibleControl Unit
A01903COMM INT: Receive configuration data invalidControl Unit
F01910Fieldbus: setpoint timeoutControl Unit
F01911PB/PN: clock cycle synchronous operation clock cycle failureControl Unit
F01912PB/PN: clock cycle synchronous operation sign-of-life failureControl Unit
F01913COMM INT: Monitoring time sign-of-life expiredControl Unit
F01914COMM INT: Monitoring time configuration expiredControl Unit
F01915PB/PN: clock cycle synchronous operation sign-of-life failure drive object 1Control Unit
A01920PROFIBUS: Interruption cyclic connectionControl Unit
A01921PROFIBUS: Receive setpoints after ToControl Unit
A01925Modbus TCP: connection interruptedControl Unit
A01930PB/PN: current controller sampling time clock cycle synch. not equalControl Unit
A01931PB/PN: speed controller sampling time clock cycle synch. not equalControl Unit
A01932PB/PN: clock cycle synchronization missing for DSCControl Unit
A01940PB/PN: clock cycle synchronism not reachedControl Unit
A01941PB/PN: clock cycle signal missing when establishing bus communicationControl Unit
A01943PB/PN: clock cycle signal error when establishing bus communicationControl Unit
A01944PB/PN: sign-of-life synchronism not reachedControl Unit
A01945PROFIBUS: Connection to the Publisher failedControl Unit
F01946PROFIBUS: Connection to the Publisher abortedControl Unit
F01950PB/PN: clock cycle synchronous operation synchronization unsuccessfulControl Unit
F01951CU SYNC: Synchronization application clock cycle missingControl Unit
F01952CU DRIVE-CLiQ: Synchronization of component not supportedControl Unit
A01953CU SYNC: Synchronization not completedControl Unit
F01954CU DRIVE-CLiQ: Synchronization unsuccessfulControl Unit
A01955CU DRIVE-CLiQ: Synchronization DO not completedControl Unit
A01970CBExx: cyclic connection interruptedControl Unit
A01971CBExx: maximum number of controllers exceededControl Unit
A01977CBE41: overtemperature alarmControl Unit
F01978CBE41: overtemperature faultControl Unit
A01979CBExx: internal error for cyclic data transferControl Unit
A01980PN: cyclic connection interruptedControl Unit
A01981PN: Maximum number of controllers exceededControl Unit
A01982PN: second controller missingControl Unit
A01983PN: system redundancy switchover runningControl Unit
A01989PN: internal cyclic data transfer errorControl Unit
A01990USS: PZD configuration errorControl Unit
A02000Function generator: Start not possibleControl Unit
A02005Function generator: Drive does not existControl Unit
A02006Function generator: No drive specified for connectionControl Unit
A02007Function generator: Drive not SERVO / VECTOR / DC_CTRLControl Unit
A02008Function generator: Drive specified a multiple number of timesControl Unit
A02009Function generator: Illegal modeControl Unit
A02010Function generator: Speed setpoint from the drive is not zeroControl Unit
A02011Function generator: The actual drive speed is not zeroControl Unit
A02015Function generator: Drive enable signals missingControl Unit
A02016Function generator: Magnetizing runningControl Unit
A02020Function generator: Parameter cannot be changedControl Unit
A02025Function generator: Period too shortControl Unit
A02026Function generator: Pulse width too highControl Unit
A02030Function generator: Physical address equals zeroControl Unit
A02040Function generator: Illegal value for offsetControl Unit
A02041Function generator: Illegal value for bandwidthControl Unit
A02047Function generator: Time slice clock cycle invalidControl Unit
A02050Trace: Start not possibleControl Unit
A02051Trace: recording not possible as a result of know-how protectionControl Unit
A02055Trace: Recording time too shortControl Unit
A02056Trace: Recording cycle too shortControl Unit
A02057Trace: Time slice clock cycle invalidControl Unit
A02058Trace: Time slice clock cycle for endless trace not validControl Unit
A02059Trace: Time slice clock cycle for 2 x 8 recording channels not validControl Unit
A02060Trace: Signal to be traced missingControl Unit
A02061Trace: Invalid signalControl Unit
A02062Trace: Invalid trigger signalControl Unit
A02063Trace: Invalid data typeControl Unit
A02070Trace: Parameter cannot be changedControl Unit
A02075Trace: Pretrigger time too longControl Unit
F02080Trace: Parameterization deleted due to unit changeoverControl Unit
A02085Message function: Parameterization errorControl Unit
A02095MTrace 0: multiple trace cannot be activatedControl Unit
A02096MTrace 0: cannot be savedControl Unit
A02097MTrace 1: multiple trace cannot be activatedControl Unit
A02098MTrace 1: cannot be savedControl Unit
A02099Trace: Insufficient Control Unit memoryControl Unit
A02100Drive: Computing dead time current controller too shortControl Unit
A02150TEC: Technology Extension cannot be loadedControl Unit
F02151TEC: internal software errorControl Unit
F02152TEC: insufficient memoryControl Unit
F02153TEC: technology function does not existControl Unit
F03000NVRAM fault on actionControl Unit
F03001NVRAM checksum incorrectControl Unit
F03500TM: InitializationControl Unit
A03501TM: Sampling time changeControl Unit
F03505CU: Analog input wire breakageControl Unit
A0350624 V power supply missingControl Unit
A03507Digital output not setControl Unit
A03510CU: Calibration data not plausibleControl Unit
A03550TM: Speed setpoint filter natural frequency > Shannon frequencyControl Unit
F03590TM: Module not readyControl Unit
A05000Power unit: Overtemperature heat sink AC inverterPower section
A05001Power unit: Overtemperature depletion layer chipPower section
A05002Power unit: Air intake overtemperaturePower section
A05003Power unit: Internal overtemperaturePower section
A05004Power unit: Rectifier overtemperaturePower section
A05005Cooling unit: Cooling medium flow rate too lowPower section
A05006Power unit: Overtemperature thermal modelPower section
N05007Power unit: Overtemperature thermal model (chassis PU)Power section
F05050Parallel circuit: Pulse enable in spite of pulse inhibitPower section
F05051Parallel circuit: Power unit pulse enable missingPower section
A05052Parallel circuit: Illegal current asymmetryPower section
A05053Parallel circuit: Inadmissible DC link voltage asymmetryPower section
A05054Parallel circuit: Power unit deactivatedPower section
F05055Parallel connection: Power units with illegal code numbersPower section
F05056Parallel circuit: Power unit EEPROM versions differPower section
F05057Parallel circuit: Power unit firmware versions differPower section
F05058Parallel circuit: VSM EEPROM versions differPower section
F05059Parallel circuit: VSM firmware versions differPower section
F05060Parallel circuit: Power unit firmware version does not matchPower section
F05061Infeed VSM countPower section
F05064Parallel connection: Pulse synchronization errorPower section
A05065Voltage measured values not plausiblePower section
A05066Parallel connection: inadmissible asymmetry VSM voltagePower section
F05118Precharging contactor simultaneity monitoring time exceededPower section
F05119Bypass contactor simultaneity monitoring time exceededPower section
F06000Infeed: Precharging monitoring time expiredInfeed (Line Module)
F06010Infeed: Power unit EP 24 V missing in operationInfeed (Line Module)
F06050Infeed: Smart Mode not supportedInfeed (Line Module)
F06052Infeed: Filter temperature evaluation not supportedInfeed (Line Module)
F06080Infeed: parameter errorInfeed (Line Module)
F06100Infeed: Shutdown due to line supply undervoltage conditionInfeed (Line Module)
A06105Infeed: Line supply undervoltageInfeed (Line Module)
F06200Infeed: One or several line phases failedInfeed (Line Module)
A06205Infeed: Voltage dip in at least one line supply phaseInfeed (Line Module)
A06206Infeed: Line currents asymmetrical alarmInfeed (Line Module)
F06207Infeed: Line currents asymmetricalInfeed (Line Module)
A06208Infeed line: supply voltage asymmetricalInfeed (Line Module)
F06210Infeed: Summation current too highInfeed (Line Module)
F06211Infeed: Summation current impermissibly highInfeed (Line Module)
A06215Infeed: Summation current too highInfeed (Line Module)
A06250Infeed: Defective capacitor(s) in at least one phase of line filterInfeed (Line Module)
F06255Infeed: temperature threshold value not permissibleInfeed (Line Module)
A06260Infeed: Temperature in the line filter too highInfeed (Line Module)
F06261Infeed: Temperature in the line filter permanently too highInfeed (Line Module)
F06262Infeed: Temperature switch in the line filter open when switching onInfeed (Line Module)
F06300Infeed: Line voltage too high at power onInfeed (Line Module)
A06301Infeed: Line supply overvoltageInfeed (Line Module)
F06310Infeed: Supply voltage (p0210) incorrectly parameterizedInfeed (Line Module)
F06311Infeed: Supply voltage (p0210) incorrectInfeed (Line Module)
F06320Master/slave: 4-channel multiplexer control not validInfeed (Line Module)
F06321Master/slave: 6-channel multiplexer control not validInfeed (Line Module)
A06350Infeed: Measured line frequency too highInfeed (Line Module)
A06351Infeed: Measured line frequency too lowInfeed (Line Module)
A06400Infeed: Line supply data identification selected/activeInfeed (Line Module)
A06401Infeed: Transformer data identification/test mode selected/activeInfeed (Line Module)
F06500Infeed: Line synchronization not possibleInfeed (Line Module)
A06502Infeed: Unable to achieve line synchronization in transformer magnetizationInfeed (Line Module)
F06503Infeed: Line black start unsuccessfulInfeed (Line Module)
F06504Infeed: Island line supply synchronization unsuccessfulInfeed (Line Module)
F06505Infeed: For transformer magnetization current limit exceededInfeed (Line Module)
A06601Infeed: Current offset measurement interruptedInfeed (Line Module)
A06602Infeed: Current offset measurement not possibleInfeed (Line Module)
F06700Infeed: Switch line contactor for load conditionInfeed (Line Module)
A06800Infeed: Maximum steady-state DC link voltage reachedInfeed (Line Module)
A06810Infeed: DC link voltage alarm threshold fallen belowInfeed (Line Module)
A06849Infeed: Short-circuit operation activeInfeed (Line Module)
F06850Infeed: Short-circuit prevailing for too longInfeed (Line Module)
F06851Infeed: Distributed infeed line monitoring trippedInfeed (Line Module)
F06855Infeed: Line filter monitor respondedInfeed (Line Module)
A06860Infeed: Function module activation not possibleInfeed (Line Module)
A06900Braking Module: Fault (1 -> 0)Braking Module
A06901Braking Module: Pre-alarm I2t shutdownBraking Module
A06904Braking Module internal is inhibitedBraking Module
A06905Braking Module internal I2t shutdown alarmBraking Module
F06906Braking Module internal faultBraking Module
F06907Braking Module internal overtemperatureBraking Module
F06908Braking Module internal overtemperature shutdownBraking Module
F06909Braking Module internal Vce faultBraking Module
A06921Braking resistor phase asymmetryBraking Module
F06922Braking resistor phase failureBraking Module
F07011Drive: Motor overtemperatureDriveFull guide
A07012Drive: Motor temperature model 1/3 overtemperatureDrive
F07013Drive: Motor temperature model configuration faultDrive
A07014Drive: Motor temperature model configuration alarmDrive
A07015Drive: Motor temperature sensor alarmDrive
F07016Drive: Motor temperature sensor faultDrive
A07017Additional temperature alarm threshold exceededDrive
F07018Additional temperature fault threshold exceededDrive
F07048Drive: Incorrect characteristic measurementDrive
F07080Drive: Incorrect control parameterDrive
F07082Macro: Execution not possibleDrive
F07083Macro: ACX file not foundDrive
F07084Macro: Condition for WaitUntil not fulfilledDrive
F07085Drive: Open-loop/closed-loop control parameters changedDrive
F07086Units changeover: Parameter limit violation due to reference value changeDrive
F07087Drive: Encoderless operation not possible for the selected pulse frequencyDrive
F07088Units changeover: Parameter limit violation due to units changeoverDrive
A07089Changing over units: Function module activation is blocked because the units have been changed overDrive
F07090Drive: Upper torque limit less than the lower torque limitDrive
A07091Drive: determined current controller dynamic response invalidDrive
A07092Drive: moment of inertia estimator still not readyDrive
F07093Drive: Test signal errorDrive
A07094General parameter limit violationDrive
A07095Drive: One Button Tuning activatedDrive
F07097Drive: Test signal error distance limitingDrive
F07098Drive: One Button Tuning configuration errorDrive
F07100Drive: Sampling times cannot be resetDrive
F07110Drive: Sampling times and basic clock cycle do not matchDrive
A07140Drive: current controller sampling time for spindle does not matchDrive
A07200Drive: Master control ON command presentDrive
F07220Drive: Master control by PLC missingDrive
F07300Drive: Line contactor feedback signal missingDrive
F07311Bypass motor switchDrive
F07312Bypass Line Side Switch:Drive
F07320Drive: Automatic restart interruptedDrive
A07321Drive: Automatic restart activeDrive
A07329Drive: kT estimator, kT(iq) characteristic or voltage compensation does not functionDrive
F07330Flying restart: Measured search current too lowDrive
F07331Flying restart: Function not supportedDrive
N07332Flying restart: maximum speed reducedDrive
F07333Closed-loop control function not supportedDrive
F07334Function not possibleDrive
A07350Drive: Measuring probe parameterized to a digital outputDrive
A07351Drive: Measuring probe parameterized to a digital outputDrive
A07354Drive: Cogging torque compensation not possibleDrive
F07355Drive: cogging torque compensation error when learningDrive
A07356Drive: Cogging torque compensation motor or encoder serial number differentDrive
A07400Drive: DC link voltage maximum controller activeDrive
A07401Drive: DC link voltage maximum controller deactivatedDrive
A07402Drive: DC link voltage minimum controller activeDrive
F07403Drive: Lower DC link voltage threshold reachedDrive
F07404Drive: Upper DC link voltage threshold reachedDrive
F07405Drive: Kinetic buffering minimum speed fallen belowDrive
F07406Drive: Kinetic buffering maximum time exceededDrive
F07407Drive: Vdc reduction not permissibleDrive
A07409Drive: U/f control, current limiting controller activeDrive
F07410Drive: Current controller output limitedDrive
F07411Drive: Flux controller output limitedDrive
F07412Drive: Commutation angle incorrect (motor model)Drive
F07413Drive: Commutation angle incorrect (pole position identification)Drive
F07414Drive: Encoder serial number changedDrive
N07415Drive: Angular commutation offset transfer runningDrive
A07416Drive: Flux controller configurationDrive
F07417Drive: Pulse technique not plausible (motor model)Drive
F07419Drive: Current setpoint filter adaptation errorDrive
F07420Drive: Current setpoint filter natural frequency > Shannon frequencyDrive
F07421Drive: Speed filter natural frequency > Shannon frequencyDrive
F07422Drive: Reference model natural frequency > Shannon frequencyDrive
F07423Drive: APC filter natural frequency > Shannon frequencyDrive
A07424Drive: Operating condition for APC not validDrive
F07425Drive: APC monitoring time for speed limit expiredDrive
F07426Technology controller actual value limitedDrive
A07428Technology controller parameterizing errorDrive
F07429Drive: DSC without encoder not possibleDrive
F07430Drive: Changeover to open-loop torque controlled operation not possibleDrive
F07431Drive: Changeover to encoderless operation not possibleDrive
F07432Drive: Motor without overvoltage protectionDrive
F07433Drive: Closed-loop control with encoder is not possible as the encoder has not been unparkedDrive
F07434Drive: It is not possible to change the direction of rotation with the pulses enabledDrive
F07435Drive: Setting the ramp-function generator for sensorless vector controlDrive
F07439Drive: Function not supportedDrive
A07440EPOS: Jerk time is limitedDrive
A07441LR: Save the position offset of the absolute encoder adjustmentDrive
F07442LR: Multiturn does not match the modulo rangeDrive
F07443LR: Reference point coordinate not in the permissible rangeDrive
F07446Load gear: Position tracking cannot be resetDrive
F07447Load gear: Position tracking, maximum actual value exceededDrive
F07448Load gear: Position tracking, linear axis has exceeded the maximum rangeDrive
F07449Load gear: Position tracking actual position outside tolerance windowDrive
F07450LR: Standstill monitoring has respondedDrive
F07451LR: Position monitoring has respondedDrive
F07452LR: Following error too highDrive
F07453LR: Position actual value preprocessing errorDrive
A07454LR: Position actual value preprocessing does not have a valid encoderDrive
A07455EPOS: Maximum velocity limitedDrive
A07456EPOS: Setpoint velocity limitedDrive
A07457EPOS: Combination of input signals illegalDrive
F07458EPOS: Reference cam not foundDrive
F07459EPOS: No zero markDrive
F07460EPOS: End of reference cam not foundDrive
A07461EPOS: Reference point not setDrive
A07462EPOS: Selected traversing block number does not existDrive
A07463EPOS: External block change not requested in the traversing blockDrive
F07464EPOS: Traversing block is inconsistentDrive
A07465EPOS: Traversing block does not have a subsequent blockDrive
A07466EPOS: Traversing block number assigned a multiple number of timesDrive
A07467EPOS: Traversing block has illegal task parametersDrive
A07468EPOS: Traversing block jump destination does not existDrive
A07469EPOS: Traversing block < target position < software limit switch minusDrive
A07470EPOS: Traversing block> target position > software limit switch plusDrive
A07471EPOS: Traversing block target position outside the modulo rangeDrive
A07472EPOS: Traversing block ABS_POS/ABS_NEG not possibleDrive
A07473EPOS: Beginning of traversing range reachedDrive
A07474EPOS: End of traversing range reachedDrive
F07475EPOS: Target position < start of traversing rangeDrive
F07476EPOS: Target position > end of the traversing rangeDrive
A07477EPOS: Target position < software limit switch minusDrive
A07478EPOS: Target position > software limit switch plusDrive
A07479EPOS: Software limit switch minus reachedDrive
A07480EPOS: Software limit switch plus reachedDrive
F07481EPOS: Axis position < software limit switch minusDrive
F07482EPOS: Axis position > software limit switch plusDrive
A07483EPOS: Travel to fixed stop clamping torque not reachedDrive
F07484EPOS: Fixed stop outside the monitoring windowDrive
F07485EPOS: Fixed stop not reachedDrive
A07486EPOS: Intermediate stop missingDrive
A07487EPOS: Reject traversing task missingDrive
F07488EPOS: Relative positioning not possibleDrive
A07489EPOS: Reference point correction outside the windowDrive
F07490EPOS: Enable signal withdrawn while traversingDrive
F07491EPOS: STOP cam minus reachedDrive
F07492EPOS: STOP cam plus reachedDrive
F07493LR: Overflow of the value range for position actual valueDrive
F07494LR: Drive Data Set changeover in operationDrive
A07495LR: Reference function interruptedDrive
A07496EPOS: Enable not possibleDrive
A07497LR: Position setting value activatedDrive
A07498LR: Measuring probe evaluation not possibleDrive
F07499EPOS: Reversing cam approached with the incorrect traversing directionDrive
F07500Drive: Power unit data set PDS not configuredDrive
F07501Drive: Motor Data Set MDS not configuredDrive
F07502Drive: Encoder Data Set EDS not configuredDrive
F07503EPOS: STOP cam approached with the incorrect traversing directionDrive
A07504Drive: Motor data set is not assigned to a drive data setDrive
A07505EPOS: Task fixed stop not possible in the U/f/SLVC modeDrive
A07506EPOS: check BICO interconnection between EPOS and position controllerDrive
A07507EPOS: reference point cannot be setDrive
F07509Drive: Component assignment missingDrive
F07510Drive: Identical encoder in the drive data setDrive
F07511Drive: Encoder used a multiple number of timesDrive
F07512Drive: Encoder data set changeover cannot be parameterizedDrive
A07514Drive: Data structure does not correspond to the interface moduleDrive
F07515Drive: Power unit and motor incorrectly connectedDrive
F07516Drive: Re-commission the data setDrive
F07517Drive: Encoder data set changeover incorrectly parameterizedDrive
F07518Drive: Motor data set changeover incorrectly parameterizedDrive
A07519Drive: Motor changeover incorrectly parameterizedDrive
A07520Drive: Motor cannot be changed overDrive
A07530Drive: Drive Data Set DDS not presentDrive
A07531Drive: Command Data Set CDS not presentDrive
A07532Drive: Encoderless control not commissionedDrive
A07541Drive: Data set changeover not possibleDrive
A07550Drive: Not possible to reset encoder parametersDrive
F07551Drive encoder: No commutation angle informationDrive
F07552Drive encoder: Encoder configuration not supportedDrive
F07553Drive encoder: Sensor Module configuration not supportedDrive
F07555Drive encoder: Configuration position trackingDrive
F07556Measuring gear: Position tracking, maximum actual value exceededDrive
A07557Encoder 1: Reference point coordinate not in the permissible rangeDrive
A07558Encoder 2: Reference point coordinate not in the permissible rangeDrive
A07559Encoder 3: Reference point coordinate not in the permissible rangeDrive
F07560Drive encoder: Number of pulses is not to the power of twoDrive
F07561Drive encoder: Number of multiturn pulses is not to the power of twoDrive
F07562Drive, encoder: Position tracking, incremental encoder not possibleDrive
F07563Drive encoder: XIST1_ERW configuration incorrectDrive
A07565Drive: Encoder error in PROFIdrive encoder interface 1Drive
A07566Drive: Encoder error in PROFIdrive encoder interface 2Drive
A07567Drive: Encoder error in PROFIdrive encoder interface 3Drive
A07569Enc identification activeDrive
N07570Encoder identification data transfer runningDrive
F07575Drive: Motor encoder not readyDrive
A07576Drive: Encoderless operation due to a fault activeDrive
A07577Encoder 1: Measuring probe evaluation not possibleDrive
A07578Encoder 2: Measuring probe evaluation not possibleDrive
A07579Encoder 3: Measuring probe evaluation not possibleDrive
A07580Drive: No Sensor Module with matching component numberDrive
A07581Encoder 1: Position actual value preprocessing errorDrive
A07582Encoder 2: Position actual value preprocessing errorDrive
A07583Encoder 3: Position actual value preprocessing errorDrive
A07584Encoder 1: Position setting value activatedDrive
A07585Encoder 2: Position setting value activatedDrive
A07586Encoder 3: Position setting value activatedDrive
A07587Encoder 1: Position actual value preprocessing does not have a valid encoderDrive
A07588Encoder 2: Position actual value preprocessing does not have a valid encoderDrive
A07589Encoder 3: Position actual value preprocessing does not have a valid encoderDrive
A07590Encoder 1: Drive Data Set changeover in operationDrive
A07591Encoder 2: Drive Data Set changeover in operationDrive
A07592Encoder 3: Drive Data Set changeover in operationDrive
A07593Encoder 1: Value range for position actual value exceededDrive
A07594Encoder 2: Value range for position actual value exceededDrive
A07595Encoder 3: Value range for position actual value exceededDrive
A07596Encoder 1: Reference function interruptedDrive
A07597Encoder 2: Reference function interruptedDrive
A07598Encoder 3: Reference function interruptedDrive
F07599Encoder 1: Adjustment not possibleDrive
F07600Encoder 2: Adjustment not possibleDrive
F07601Encoder 3: Adjustment not possibleDrive
F07750Drive: Parameter invalidDrive
F07751Drive: valve does not respondDrive
F07752Drive: Piston position not possibleDrive
F07753Drive: No valid pressure actual value availableDrive
F07754Drive: Incorrect shutoff valve configurationDrive
F07755Drive: travel to fixed end stop without force controllerDrive
F07756Drive: Filter natural frequency > Shannon frequencyDrive
F07800Drive: No power unit presentDrive
F07801Drive: Motor overcurrentDrive
F07802Drive: Infeed or power unit not readyDrive
A07805Infeed: Power unit overload I2tDrive
F07807Drive: Short-circuit/ground fault detectedDrive
F07808HF Damping Module: damping not readyDrive
F07810Drive: Power unit EEPROM without rated dataDrive
F07815Drive: Power unit has been changedDrive
A07820Drive: Temperature sensor not connectedDrive
A07821Monitoring underspeed threshold fallen below alarmDrive
F07822Monitoring underspeed threshold fallen below faultDrive
A07823I2t monitoring alarm threshold exceededDrive
F07824I2t monitoring fault threshold exceededDrive
A07825Drive: Simulation mode activatedDrive
F07826Drive: DC link voltage for simulation operation too highDrive
F07840Drive: Infeed operation missingDrive
F07841Drive: Infeed operation withdrawnDrive
A07850External alarm 1Drive
A07851External alarm 2Drive
A07852External alarm 3Drive
F07860External fault 1Drive
F07861External fault 2Drive
F07862External fault 3Drive
F07890Internal voltage protection / internal armature short-circuit with STO activeDrive
F07898Drive: flying restart unsuccessful due to excessively low fluxDrive
A07899Drive: Stall monitoring not possibleDrive
F07900Drive: Motor blocked/speed controller at its limitDriveFull guide
F07901Drive: Motor overspeedDrive
F07902Drive: Motor stalledDrive
A07903Drive: Motor speed deviationDrive
F07904External armature short-circuit: Contactor feedback signal "Closed" missingDrive
F07905External armature short-circuit: Contactor feedback signal "Open" missingDrive
F07906Armature short-circuit / internal voltage protection: Parameterization errorDrive
F07907Internal armature short-circuit: Motor terminals are not at zero potential after pulse suppressionDrive
A07908Internal armature short-circuit activeDrive
F07909Internal voltage protection: Deactivation only effective after POWER ONDrive
A07910Drive: Motor overtemperatureDrive
F07913Excitation current outside the tolerance rangeDrive
F07914Flux out of toleranceDrive
A07918Three-phase setpoint generator operation selected/activeDrive
A07920Drive: Torque/speed too lowDrive
A07921Drive: Torque/speed too highDrive
A07922Drive: Torque/speed out of toleranceDrive
F07923Drive: Torque/speed too lowDrive
F07924Drive: Torque/speed too highDrive
F07925Drive: Torque/speed out of toleranceDrive
A07926Drive: Envelope curve parameter invalidDrive
A07927DC braking activeDrive
F07928Internal voltage protection initiatedDrive
F07930Drive: Brake control errorDrive
A07931Brake does not openDrive
A07932Brake does not closeDrive
F07934Drive: S120 Combi motor holding brake configurationDrive
F07935Drive: Incorrect motor holding brake configurationDrive
F07937Drive: Speed deviation between motor model and external speedDrive
F07940Sync-line-drive: Synchronizing errorDrive
A07941Sync-line-drive: Target frequency not permissibleDrive
A07942Sync-line-drive: Setpoint frequency is completely different than the target frequencyDrive
A07943Sync-line-drive: Synchronization not permittedDrive
F07950Drive: Incorrect motor parameterDrive
F07955Drive: Motor has been changedDrive
F07956Drive: Motor code does not match the list (catalog) motorDrive
A07960Drive: Incorrect friction characteristicDrive
A07961Drive: Record friction characteristic activatedDrive
F07963Drive: Record friction characteristic canceledDrive
A07965Drive: Save requiredDrive
F07966Drive: Check the commutation angleDrive
F07967Drive: Automatic encoder adjustment/pole position identification incorrectDrive
F07968Drive: Lq-Ld measurement incorrectDrive
F07969Drive: Incorrect pole position identificationDrive
F07970Drive: Automatic encoder adjustment incorrectDrive
A07971Drive: Angular commutation offset determination activatedDrive
A07975Drive: Travel to the zero mark - setpoint input expectedDrive
A07976Drive: Fine encoder calibration activatedDrive
A07978Drive: activated ESM mode waits for the end of motor identificationDrive
A07979Drive: pole position identification calibration requiredDrive
A07980Drive: Rotating measurement activatedDrive
A07981Drive: Enable signals for the rotating measurement missingDrive
F07982Drive: Rotating measurement encoder testDrive
F07983Drive: Rotating measurement saturation characteristicDrive
F07984Drive: Speed controller optimization, moment of inertiaDrive
F07985Drive: Speed controller optimization (oscillation test)Drive
F07986Drive: Rotating measurement ramp-function generatorDrive
A07987Drive: Rotating measurement, no encoder availableDrive
F07988Drive: Rotating measurement, no configuration selectedDrive
F07989Drive: Rotating measurement leakage inductance (q-axis)Drive
F07990Drive: Incorrect motor data identificationDrive
A07991Drive: Motor data identification activatedDrive
F07993Drive: Incorrect direction of rotation of the field or encoder actual value inversionDrive
A07994Drive: motor data identification not performedDrive
F07995Drive: Pole position identification not successfulDrive
F07996Drive: Pole position identification routine not carried outDrive
A07998Drive: Motor data identification active on another driveDrive
A07999Drive: Motor data identification cannot be activatedDrive
F08000TB: +/-15 V power supply faultedOption board
F08010TB: Analog-digital converterOption board
F08500COMM BOARD: Monitoring time configuration expiredOption board
F08501PN/COMM BOARD: Setpoint timeoutOption board
F08502PN/COMM BOARD: Monitoring time sign-of-life expiredOption board
A08504PN/COMM BOARD: Internal cyclic data transfer errorOption board
F08510PN/COMM BOARD: Send configuration data invalidOption board
A08511PN/COMM BOARD: Receive configuration data invalidOption board
A08520PN/COMM BOARD: Non-cyclic channel errorOption board
A08526PN/COMM BOARD: No cyclic connectionOption board
A08530PN/COMM BOARD: Message channel errorOption board
A08531CBE20 POWER ON requiredOption board
A08550PZD Interface Hardware assignment errorOption board
A08555Modbus TCP: commissioning errorOption board
A08560IE: Syntax error in configuration fileOption board
A08561IE: Consistency error affecting adjustable parametersOption board
A08562PROFINET: Syntax error in configuration fileOption board
A08563PROFINET: Consistency error affecting adjustable parametersOption board
A08564PN/COMM BOARD: syntax error in the configuration fileOption board
A08565PNCOMM BOARD: Consistency error affecting adjustable parametersOption board
F08700CAN: Communications errorOption board
F08701CAN: NMT state changeOption board
F08702CAN: RPDO TimeoutOption board
F08703CAN: Maximum number of drive objects exceededOption board
A08751CAN: Telegram lossOption board
A08752CAN: Error counter for error passive exceededOption board
A08753CAN: Message buffer overflowOption board
A08754CAN: Incorrect communications modeOption board
A08755CAN: Object cannot be mappedOption board
A08756CAN: Number of mapped bytes exceededOption board
A08757CAN: Set COB-ID invalidOption board
A08758CAN: Maximum number of valid PDO exceededOption board
A08759CAN: PDO COB-ID already availableOption board
A08760CAN: maximum size of the IF PZD exceededOption board
A08800PROFIenergy energy-saving mode activeOption board
A09000Web server user incorrectly configuredOther
F13000License not adequateLicensing / know-how protection
A13001Error in license checksumLicensing / know-how protection
F13009Licensing Technology Extension not licensedLicensing / know-how protection
F13010Licensing function module not licensedLicensing / know-how protection
F13020Licensing not sufficient in the controlLicensing / know-how protection
A13021Licensing for output frequencies > 550 Hz missingLicensing / know-how protection
A13030Trial License activatedLicensing / know-how protection
A13031Trial License period expiredLicensing / know-how protection
A13032Trial License last period activatedLicensing / know-how protection
A13033Trial License last period expiredLicensing / know-how protection
F13100Know-how protection: Copy protection errorLicensing / know-how protection
F13101Know-how protection: Copy protection cannot be activatedLicensing / know-how protection
F13102Know-how protection: Consistency error of the protected dataLicensing / know-how protection
F30001Power unit: OvercurrentPower unit (Motor Module)Full guide
F30002Power unit: DC link voltage overvoltagePower unit (Motor Module)Full guide
F30003Power unit: DC link voltage undervoltagePower unit (Motor Module)Full guide
F30004Power unit: Overtemperature heat sink AC inverterPower unit (Motor Module)Full guide
F30005Power unit: Overload I2tPower unit (Motor Module)Full guide
F30006Power unit: Thyristor Control BoardPower unit (Motor Module)
F30008Power unit: Sign-of-life error cyclic dataPower unit (Motor Module)
A30010Power unit: Sign-of-life error cyclic dataPower unit (Motor Module)
F30011Power unit: Line phase failure in main circuitPower unit (Motor Module)Full guide
F30012Power unit: Temperature sensor wire breakagePower unit (Motor Module)
F30013Power unit: Temperature sensor short circuitPower unit (Motor Module)
F30015Power unit: Phase failure motor cablePower unit (Motor Module)
A30016Power unit: Load supply switched offPower unit (Motor Module)
F30017Power unit: Hardware current limit has responded too oftenPower unit (Motor Module)
F30020Power unit: Configuration not supportedPower unit (Motor Module)
F30021Power unit: Ground faultPower unit (Motor Module)Full guide
F30022Power unit: Monitoring U_cePower unit (Motor Module)
F30024Power unit: Overtemperature thermal modelPower unit (Motor Module)
F30025Power unit: Chip overtemperaturePower unit (Motor Module)
F30027Power unit: Precharging DC link time monitoringPower unit (Motor Module)Full guide
A30030Power unit: Internal overtemperature alarmPower unit (Motor Module)
A30031Power unit: Hardware current limiting in phase UPower unit (Motor Module)
A30032Power unit: Hardware current limiting in phase VPower unit (Motor Module)
A30033Power unit: Hardware current limiting in phase WPower unit (Motor Module)
A30034Power unit: Internal overtemperaturePower unit (Motor Module)
F30035Power unit: Air intake overtemperaturePower unit (Motor Module)
F30036Power unit: Internal overtemperaturePower unit (Motor Module)
F30037Power unit: Rectifier overtemperaturePower unit (Motor Module)
A30038Power unit: Capacitor fan monitoringPower unit (Motor Module)
F30039Power unit: Failure capacitor fanPower unit (Motor Module)
F30040Power unit: Undervolt 24 VPower unit (Motor Module)
A30041Power unit: Undervoltage 24 V alarmPower unit (Motor Module)
A30042Power unit: Fan has reached the maximum operating hoursPower unit (Motor Module)
F30043Power unit: Overvolt 24 VPower unit (Motor Module)
A30044Power unit: Overvoltage 24 V alarmPower unit (Motor Module)
F30045Power unit: Supply undervoltagePower unit (Motor Module)
A30046Power unit: Undervoltage alarmPower unit (Motor Module)
F30047Cooling unit: Cooling medium flow rate too lowPower unit (Motor Module)
A30048Power unit: fan defectivePower unit (Motor Module)
A30049Power unit: Internal fan faultyPower unit (Motor Module)
F30050Power unit: 24 V supply overvoltagePower unit (Motor Module)
F30051Power unit: Motor holding brake short circuit detectedPower unit (Motor Module)
F30052EEPROM data errorPower unit (Motor Module)
F30053FPGA data faultyPower unit (Motor Module)
A30054Power unit: Undervoltage when opening the brakePower unit (Motor Module)
F30055Power unit: Braking chopper overcurrentPower unit (Motor Module)
A30057Power unit: Line asymmetryPower unit (Motor Module)
F30058Power unit: heat sink fan defectivePower unit (Motor Module)
F30059Power unit: Internal fan faultyPower unit (Motor Module)
F30060Precharge contactor state monitoringPower unit (Motor Module)
F30061Bridging contactor monitoringPower unit (Motor Module)
A30065Voltage measured values not plausiblePower unit (Motor Module)
A30066Power unit: overtemperature, alarm capacitor air dischargePower unit (Motor Module)
F30067Power unit: overtemperature, fault capacitor air dischargePower unit (Motor Module)
F30068Power unit: undertemperature inverter heat sinkPower unit (Motor Module)
F30070Cycle requested by the power unit module not supportedPower unit (Motor Module)
F30071No new actual values received from the power unitPower unit (Motor Module)
F30072Setpoints can no longer be transferred to the power unitPower unit (Motor Module)
A30073Actual value/setpoint preprocessing no longer synchronousPower unit (Motor Module)
F30074Communication error between the Control Unit and Power ModulePower unit (Motor Module)
F30075Configuration of the power unit unsuccessfulPower unit (Motor Module)
A30076Power unit: thermal overload internal braking resistor alarmPower unit (Motor Module)
A30077Power unit: thermal overload internal braking resistorPower unit (Motor Module)
F30078Power unit: defective fan or line reactor has overheatedPower unit (Motor Module)
A30079Power unit: referred to the supply voltage, the DC link voltage is too highPower unit (Motor Module)
F30080Power unit: Current increasing too quicklyPower unit (Motor Module)
F30081Power unit: Switching operations too frequentPower unit (Motor Module)
A30082Power unit: cooling medium flow rate too low alarm thresholdPower unit (Motor Module)
F30083Power unit: cooling medium flow rate too low fault thresholdPower unit (Motor Module)
A30086Power unit: coolant temperature has exceeded the alarm thresholdPower unit (Motor Module)
F30087Power unit: coolant temperature has exceeded the fault thresholdPower unit (Motor Module)
F30105PU: Actual value sensing faultPower unit (Motor Module)
F30314Power unit: 24 V power supply overloaded by PMPower unit (Motor Module)
A30315Power unit: 24 V power supply overloaded by PMPower unit (Motor Module)
A30502Power unit: DC link overvoltagePower unit (Motor Module)
F30600SI P2: STOP A initiatedPower unit (Motor Module)
F30611SI P2: Defect in a monitoring channelPower unit (Motor Module)
N30620SI P2: Safe Torque Off activePower unit (Motor Module)
N30621SI P2: Safe Stop 1 activePower unit (Motor Module)
F30625SI P2: Sign-of-life error in safety dataPower unit (Motor Module)
F30630SI P2: Brake control errorPower unit (Motor Module)
F30631Brake control: External release activePower unit (Motor Module)
F30632SI P2: shutoff valve control/feedback signal errorPower unit (Motor Module)
A30640SI P2: Fault in the switch-off signal path of the second channelPower unit (Motor Module)
F30649SI P2: Internal software errorPower unit (Motor Module)
F30650SI P2: Acceptance test requiredPower unit (Motor Module)
F30651SI P2: Synchronization with Control Unit unsuccessfulPower unit (Motor Module)
F30652SI P2: Illegal monitoring clock cyclePower unit (Motor Module)
F30655SI P2: Align monitoring functionsPower unit (Motor Module)
F30656SI P2: Motor Module parameter errorPower unit (Motor Module)
F30657SI P2: PROFIsafe telegram number invalidPower unit (Motor Module)
F30659SI P2: Write request for parameter rejectedPower unit (Motor Module)
F30664Error while bootingPower unit (Motor Module)
F30665SI P2: System is defectivePower unit (Motor Module)
A30666SI Motion P2: Steady-state (static) 1 signal at the F-DI for safe acknowledgmentPower unit (Motor Module)
F30672SI P2: Control Unit software incompatiblePower unit (Motor Module)
F30674SI Motion P2: Safety function not supported by PROFIsafe telegramPower unit (Motor Module)
F30680SI Motion P2: Checksum error safety monitoring functionsPower unit (Motor Module)
F30681SI Motion P1: Incorrect parameter valuePower unit (Motor Module)
F30682SI Motion P2: Monitoring function not supportedPower unit (Motor Module)
F30683SI Motion P2: SOS/SLS enable missingPower unit (Motor Module)
F30684SI Motion P2: Safely-Limited Position limit values interchangedPower unit (Motor Module)
F30685SI Motion P2: Safely-Limited Speed limit value too highPower unit (Motor Module)
F30686SI Motion: Illegal parameterization cam positionPower unit (Motor Module)
F30688SI Motion P2: Actual value synchronization not permissiblePower unit (Motor Module)
F30692SI Motion P2: Parameter value not permitted for encoderlessPower unit (Motor Module)
A30693SI P2: Safety parameter settings changed, warm restart/POWER ON requiredPower unit (Motor Module)
C30700SI Motion P2: STOP A initiatedPower unit (Motor Module)
C30701SI Motion P2: STOP B initiatedPower unit (Motor Module)
C30706SI Motion P2: SAM/SBR limit exceededPower unit (Motor Module)
C30707SI Motion P2: Tolerance for safe operating stop exceededPower unit (Motor Module)
C30708SI Motion P2: STOP C initiatedPower unit (Motor Module)
C30709SI Motion P2: STOP D initiatedPower unit (Motor Module)
C30710SI Motion P2: STOP E initiatedPower unit (Motor Module)
C30711SI Motion P2: Defect in a monitoring channelPower unit (Motor Module)
C30712SI Motion P2: Defect in F-IO processingPower unit (Motor Module)
C30714SI Motion P2: Safely-Limited Speed exceededPower unit (Motor Module)
C30715SI Motion P2: Safely-Limited Position exceededPower unit (Motor Module)
C30716SI Motion P2: Tolerance for safe motion direction exceededPower unit (Motor Module)
C30717SI Motion P2: SLA limit exceededPower unit (Motor Module)
C30730SI Motion P2: Reference block for dynamic Safely-Limited Speed invalidPower unit (Motor Module)
C30770SI Motion P2: Discrepancy error of the failsafe inputs/outputsPower unit (Motor Module)
A30772SI Motion P2: Test stop for failsafe digital outputs runningPower unit (Motor Module)
F30773SI Motion P2: Test stop failsafe digital output errorPower unit (Motor Module)
A30788Automatic test stop: wait for STO deselection via SMMPower unit (Motor Module)
C30797SI Motion P2: Axis not safely referencedPower unit (Motor Module)
C30798SI Motion P2: Test stop for motion monitoring functions runningPower unit (Motor Module)
C30799SI Motion P2: Acceptance test mode activePower unit (Motor Module)
N30800Power unit: Group signalPower unit (Motor Module)
F30801Power unit DRIVE-CLiQ: Sign-of-life missingPower unit (Motor Module)
F30802Power unit: Time slice overflowPower unit (Motor Module)
F30804Power unit: CRCPower unit (Motor Module)
F30805Power unit: EEPROM checksum errorPower unit (Motor Module)
F30809Power unit: Switching information not validPower unit (Motor Module)
A30810Power unit: Watchdog timerPower unit (Motor Module)
F30820Power unit DRIVE-CLiQ: Telegram errorPower unit (Motor Module)
F30835Power unit DRIVE-CLiQ: Cyclic data transfer errorPower unit (Motor Module)
F30836Power unit DRIVE-CLiQ: Send error for DRIVE-CLiQ dataPower unit (Motor Module)
F30837Power unit DRIVE-CLiQ: Component faultPower unit (Motor Module)
F30845Power unit DRIVE-CLiQ: Cyclic data transfer errorPower unit (Motor Module)
F30850Power unit: Internal software errorPower unit (Motor Module)
F30851Power unit DRIVE-CLiQ (CU): Sign-of-life missingPower unit (Motor Module)
A30853Power unit: Sign-of-life error cyclic dataPower unit (Motor Module)
F30860Power unit DRIVE-CLiQ (CU): Telegram errorPower unit (Motor Module)
F30875Power unit: power supply voltage failedPower unit (Motor Module)
F30885CU DRIVE-CLiQ (CU): Cyclic data transfer errorPower unit (Motor Module)
F30886PU DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataPower unit (Motor Module)
F30887Power unit DRIVE-CLiQ (CU): Component faultPower unit (Motor Module)
F30895PU DRIVE-CLiQ (CU): Alternating cyclic data transfer errorPower unit (Motor Module)
F30896Power unit DRIVE-CLiQ (CU): Inconsistent component propertiesPower unit (Motor Module)
F30899Power unit: Unknown faultPower unit (Motor Module)
F30903Power unit: I2C bus error occurredPower unit (Motor Module)
F30907Power unit: FPGA configuration unsuccessfulPower unit (Motor Module)
A30919Power unit: Temperature monitoring failedPower unit (Motor Module)
A30920Power unit: Temperature sensor faultPower unit (Motor Module)
A30930Power unit: Component trace has saved dataPower unit (Motor Module)
F30950Power unit: Internal software errorPower unit (Motor Module)
A30999Power unit: Unknown alarmPower unit (Motor Module)
F31100Encoder 1: Zero mark distance errorEncoder 1
F31101Encoder 1: Zero mark failedEncoder 1
F31103Encoder 1: Signal level zero mark (track R) outside toleranceEncoder 1
F31110Encoder 1: Serial communications errorEncoder 1Full guide
F31111Encoder 1: Encoder signals an internal error (detailed information)Encoder 1
F31112Encoder 1: Encoder signals an internal errorEncoder 1
F31115Encoder 1: Signal level track A or B too lowEncoder 1
F31116Encoder 1: Signal level track A or B too lowEncoder 1
F31117Encoder 1: Inversion error signals A/B/REncoder 1
F31118Encoder 1: Speed change not plausibleEncoder 1
F31120Encoder 1: Encoder power supply faultEncoder 1
F31121Encoder 1: Determined commutation position incorrectEncoder 1
F31122Encoder 1: Sensor Module hardware faultEncoder 1
F31123Encoder 1: Signal level A/B outside toleranceEncoder 1
F31125Encoder 1: Signal level track A or B too highEncoder 1
F31126Encoder 1: Signal level track A or B too highEncoder 1
F31129Encoder 1: Position difference hall sensor/track C/D and A/B too largeEncoder 1
F31130Encoder 1: Zero mark and position error from the coarse synchronizationEncoder 1
F31131Encoder 1: Position deviation incremental/absolute too highEncoder 1
F31135Encoder 1: Fault when determining the position (single turn)Encoder 1
F31136Encoder 1: Fault when determining the position (multiturn)Encoder 1
F31137Encoder 1: Fault when determining the position (single turn)Encoder 1
F31138Encoder 1: Fault when determining the position (multiturn)Encoder 1
F31142Encoder 1: Battery voltage faultEncoder 1
F31150Encoder 1: Initialization errorEncoder 1
F31151Encoder 1: Encoder speed for initialization AB too highEncoder 1
F31152Encoder 1: Max. signal frequency (track A/B) exceededEncoder 1
F31153Encoder 1: Identification errorEncoder 1
F31160Encoder 1: Analog sensor channel A failedEncoder 1
F31161Encoder 1: Analog sensor channel B failedEncoder 1
F31163Encoder 1: Analog sensor position value exceeds limit valueEncoder 1
A31400Encoder 1: Zero mark distance error (alarm threshold exceeded)Encoder 1
A31401Encoder 1: Zero mark failed (alarm threshold exceeded)Encoder 1
F31405Encoder 1: Temperature in the encoder evaluation exceededEncoder 1
A31407Encoder 1: Function limit reachedEncoder 1
A31410Encoder 1: Communication error (encoder and Sensor Module)Encoder 1
A31411Encoder 1: Encoder signals an internal alarm (detailed information)Encoder 1
A31412Encoder 1: Encoder signals an internal alarmEncoder 1
A31414Encoder 1: Signal level track C or D out of toleranceEncoder 1
N31415Encoder 1: Signal level track A or B outside tolerance (alarm)Encoder 1
A31418Encoder 1: Speed change not plausible (alarm)Encoder 1
A31419Encoder 1: Track A or B outside toleranceEncoder 1
A31421Encoder 1: Determined commutation position incorrect (alarm)Encoder 1
A31422Encoder 1: Pulses per revolution square-wave encoder outside tolerance bandwidthEncoder 1
A31429Encoder 1: Position difference hall sensor/track C/D and A/B too largeEncoder 1
A31431Encoder 1: Position deviation incremental/absolute too high (alarm)Encoder 1
A31432Encoder 1: Rotor position adaptation corrects deviationEncoder 1
A31442Encoder 1: Battery voltage alarm threshold reachedEncoder 1
A31443Encoder 1: Signal level track C/D outside tolerance (alarm)Encoder 1
A31460Encoder 1: Analog sensor channel A failedEncoder 1
A31461Encoder 1: Analog sensor channel B failedEncoder 1
A31462Encoder 1: Analog sensor no channel activeEncoder 1
A31463Encoder 1: Analog sensor position value exceeds limit valueEncoder 1
A31470Encoder 1: Encoder signals an internal error (X521.7)Encoder 1
F31500Encoder 1: Position tracking traversing range exceededEncoder 1
F31501Encoder 1: Position tracking encoder position outside tolerance windowEncoder 1
F31502Encoder 1: Encoder with measuring gear without valid signalsEncoder 1
F31503Encoder 1: Position tracking cannot be resetEncoder 1
A31700Encoder 1: Functional safety monitoring initiatedEncoder 1
N31800Encoder 1: Group signalEncoder 1
F31801Encoder 1 DRIVE-CLiQ: Sign-of-life missingEncoder 1
F31802Encoder 1: Time slice overflowEncoder 1
F31804Encoder 1: Sensor Module checksum errorEncoder 1
F31805Encoder 1: EEPROM checksum errorEncoder 1
F31806Encoder 1: Initialization errorEncoder 1
A31811Encoder 1: Encoder serial number changedEncoder 1
F31812Encoder 1: Requested cycle or RX-/TX timing not supportedEncoder 1
F31813Encoder 1: Hardware logic unit failedEncoder 1
F31820Encoder 1 DRIVE-CLiQ: Telegram errorEncoder 1
F31835Encoder 1 DRIVE-CLiQ: Cyclic data transfer errorEncoder 1
F31836Encoder 1 DRIVE-CLiQ: Send error for DRIVE-CLiQ dataEncoder 1
F31837Encoder 1 DRIVE-CLiQ: Component faultEncoder 1
F31845Encoder 1 DRIVE-CLiQ: Cyclic data transfer errorEncoder 1
F31850Encoder 1: Encoder evaluation internal software errorEncoder 1
F31851Encoder 1 DRIVE-CLiQ (CU): Sign-of-life missingEncoder 1
F31860Encoder 1 DRIVE-CLiQ (CU): Telegram errorEncoder 1
F31875Encoder 1: power supply voltage failedEncoder 1
F31885Encoder 1 DRIVE-CLiQ (CU): Cyclic data transfer errorEncoder 1Full guide
F31886Encoder 1 DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataEncoder 1
F31887Encoder 1 DRIVE-CLiQ (CU): Component faultEncoder 1
F31895Encoder 1 DRIVE-CLiQ (CU): Alternating cyclic data transfer errorEncoder 1
F31896Encoder 1 DRIVE-CLiQ (CU): Inconsistent component propertiesEncoder 1
F31899Encoder 1: Unknown faultEncoder 1
A31902Encoder 1: SPI-BUS error occurredEncoder 1
A31903Encoder 1: I2C-BUS error occurredEncoder 1
F31905Encoder 1: Encoder parameterization errorEncoder 1
F31912Encoder 1: Device combination is not permissibleEncoder 1
A31915Encoder 1: Encoder configuration errorEncoder 1
F31916Encoder 1: Encoder parameterization errorEncoder 1
A31920Encoder 1: Temperature sensor fault (motor)Encoder 1
A31930Encoder 1: Data logger has saved dataEncoder 1
A31940Encoder 1: Spindle sensor S1 voltage incorrectEncoder 1
F31950Encoder 1: Internal software errorEncoder 1
A31999Encoder 1: Unknown alarmEncoder 1
F32100Encoder 2: Zero mark distance errorEncoder 2
F32101Encoder 2: Zero mark failedEncoder 2
F32103Encoder 2: Signal level zero track (track R) outside toleranceEncoder 2
F32110Encoder 2: Serial communications errorEncoder 2
F32111Encoder 2: Encoder signals an internal error (detailed information)Encoder 2
F32112Encoder 2: Encoder signals an internal errorEncoder 2
F32115Encoder 2: Signal level track A or B too lowEncoder 2
F32116Encoder 2: Signal level track A or B too lowEncoder 2
F32117Encoder 2: Inversion error signals A/B/REncoder 2
F32118Encoder 2: Speed change not plausibleEncoder 2
F32120Encoder 2: Encoder power supply faultEncoder 2
F32121Encoder 2: Determined commutation position incorrectEncoder 2
F32122Encoder 2: Sensor Module hardware faultEncoder 2
F32123Encoder 2: Signal level A/B outside toleranceEncoder 2
F32125Encoder 2: Signal level track A or B too highEncoder 2
F32126Encoder 2: Signal level track A or B too highEncoder 2
F32129Encoder 2: Position difference hall sensor/track C/D and A/B too largeEncoder 2
F32130Encoder 2: Zero mark and position error from the coarse synchronizationEncoder 2
F32131Encoder 2: Position deviation incremental/absolute too highEncoder 2
F32135Encoder 2: Fault when determining the position (single turn)Encoder 2
F32136Encoder 2: Fault when determining the position (multiturn)Encoder 2
F32137Encoder 2: Fault when determining the position (single turn)Encoder 2
F32138Encoder 2: Fault when determining the position (multiturn)Encoder 2
F32142Encoder 2: Battery voltage faultEncoder 2
F32150Encoder 2: Initialization errorEncoder 2
F32151Encoder 2: Encoder speed for initialization AB too highEncoder 2
F32152Encoder 2: Max. signal frequency (track A/B) exceededEncoder 2
F32153Encoder 2: Identification errorEncoder 2
F32160Encoder 2: Analog sensor channel A failedEncoder 2
F32161Encoder 2: Analog sensor channel B failedEncoder 2
F32163Encoder 2: Analog sensor position value exceeds limit valueEncoder 2
A32400Encoder 2: Zero mark distance error (alarm threshold exceeded)Encoder 2
A32401Encoder 2: Zero mark failed (alarm threshold exceeded)Encoder 2
F32405Encoder 2: Temperature in the encoder evaluation exceededEncoder 2
A32407Encoder 2: Function limit reachedEncoder 2
A32410Encoder 2: Communication error (encoder and Sensor Module)Encoder 2
A32411Encoder 2: Encoder signals an internal alarm (detailed information)Encoder 2
A32412Encoder 2: Encoder signals an internal alarmEncoder 2
A32414Encoder 2: Signal level track C or D out of toleranceEncoder 2
N32415Encoder 2: Signal level track A or B outside tolerance (alarm)Encoder 2
A32418Encoder 2: Speed change not plausible (alarm)Encoder 2
A32419Encoder 2: Track A or B outside toleranceEncoder 2
A32421Encoder 2: Determined commutation position incorrect (alarm)Encoder 2
A32422Encoder 2: Pulses per revolution square-wave encoder outside tolerance bandwidthEncoder 2
A32429Encoder 2: Position difference hall sensor/track C/D and A/B too largeEncoder 2
A32431Encoder 2: Position deviation incremental/absolute too high (alarm)Encoder 2
A32432Encoder 2: Rotor position adaptation corrects deviationEncoder 2
A32442Encoder 2: Battery voltage alarm threshold reachedEncoder 2
A32443Encoder 2: Signal level track C/D outside tolerance (alarm)Encoder 2
A32460Encoder 2: Analog sensor channel A failedEncoder 2
A32461Encoder 2: Analog sensor channel B failedEncoder 2
A32462Encoder 2: Analog sensor no channel activeEncoder 2
A32463Encoder 2: Analog sensor position value exceeds limit valueEncoder 2
A32470Encoder 2: Encoder signals an internal error (X521.7)Encoder 2
F32500Encoder 2: Position tracking traversing range exceededEncoder 2
F32501Encoder 2: Position tracking encoder position outside tolerance windowEncoder 2
F32502Encoder 2: Encoder with measuring gear without valid signalsEncoder 2
F32503Encoder 2: Position tracking cannot be resetEncoder 2
A32700Encoder 2: Effectivity test does not supply the expected valueEncoder 2
N32800Encoder 2: Group signalEncoder 2
F32801Encoder 2 DRIVE-CLiQ: Sign-of-life missingEncoder 2
F32802Encoder 2: Time slice overflowEncoder 2
F32804Encoder 2: Sensor Module checksum errorEncoder 2
F32805Encoder 2: EEPROM checksum errorEncoder 2
F32806Encoder 2: Initialization errorEncoder 2
A32811Encoder 2: Encoder serial number changedEncoder 2
F32812Encoder 2: Requested cycle or RX-/TX timing not supportedEncoder 2
F32813Encoder 2: Hardware logic unit failedEncoder 2
F32820Encoder 2 DRIVE-CLiQ: Telegram errorEncoder 2
F32835Encoder 2 DRIVE-CLiQ: Cyclic data transfer errorEncoder 2
F32836Encoder 2 DRIVE-CLiQ: Send error for DRIVE-CLiQ dataEncoder 2
F32837Encoder 2 DRIVE-CLiQ: Component faultEncoder 2
F32845Encoder 2 DRIVE-CLiQ: Cyclic data transfer errorEncoder 2
F32850Encoder 2: Encoder evaluation internal software errorEncoder 2
F32851Encoder 2 DRIVE-CLiQ (CU): Sign-of-life missingEncoder 2
F32860Encoder 2 DRIVE-CLiQ (CU): Telegram errorEncoder 2
F32875Encoder 2: power supply voltage failedEncoder 2
F32885Encoder 2 DRIVE-CLiQ (CU): Cyclic data transfer errorEncoder 2
F32886Encoder 2 DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataEncoder 2
F32887Encoder 2 DRIVE-CLiQ (CU): Component faultEncoder 2
F32895Encoder 2 DRIVE-CLiQ (CU): Alternating cyclic data transfer errorEncoder 2
F32896Encoder 2 DRIVE-CLiQ (CU): Inconsistent component propertiesEncoder 2
F32899Encoder 2: Unknown faultEncoder 2
A32902Encoder 2: SPI-BUS error occurredEncoder 2
A32903Encoder 2: I2C-BUS error occurredEncoder 2
F32905Encoder 2: Encoder parameterization errorEncoder 2
F32912Encoder 2: Device combination is not permissibleEncoder 2
A32915Encoder 2: Encoder configuration errorEncoder 2
F32916Encoder 2: Encoder parameterization errorEncoder 2
A32920Encoder 2: Temperature sensor fault (motor)Encoder 2
A32930Encoder 2: Data logger has saved dataEncoder 2
A32940Encoder 2: Spindle sensor S1 voltage incorrectEncoder 2
F32950Encoder 2: Internal software errorEncoder 2
A32999Encoder 2: Unknown alarmEncoder 2
F33100Encoder 3: Zero mark distance errorEncoder 3
F33101Encoder 3: Zero mark failedEncoder 3
F33103Encoder 3: Signal level zero track (track R) outside toleranceEncoder 3
F33110Encoder 3: Serial communications errorEncoder 3
F33111Encoder 3: Encoder signals an internal error (detailed information)Encoder 3
F33112Encoder 3: Encoder signals an internal errorEncoder 3
F33115Encoder 3: Signal level track A or B too lowEncoder 3
F33116Encoder 3: Signal level track A or B too lowEncoder 3
F33117Encoder 3: Inversion error signals A/B/REncoder 3
F33118Encoder 3: Speed change not plausibleEncoder 3
F33120Encoder 3: Encoder power supply faultEncoder 3
F33121Encoder 3: Determined commutation position incorrectEncoder 3
F33122Encoder 3: Sensor Module hardware faultEncoder 3
F33123Encoder 3: Signal level A/B outside toleranceEncoder 3
F33125Encoder 3: Signal level track A or B too highEncoder 3
F33126Encoder 3: Signal level track A or B too highEncoder 3
F33129Encoder 3: Position difference hall sensor/track C/D and A/B too largeEncoder 3
F33130Encoder 3: Zero mark and position error from the coarse synchronizationEncoder 3
F33131Encoder 3: Position deviation incremental/absolute too highEncoder 3
F33135Encoder 3: Fault when determining the position (singleturn)Encoder 3
F33136Encoder 3: Fault when determining the position (multiturn)Encoder 3
F33137Encoder 3: Fault when determining the position (singleturn)Encoder 3
F33138Encoder 3: Fault when determining the position (multiturn)Encoder 3
F33142Encoder 3: Battery voltage faultEncoder 3
F33150Encoder 3: Initialization errorEncoder 3
F33151Encoder 3: Encoder speed for initialization AB too highEncoder 3
F33152Encoder 3: Max. signal frequency (track A/B) exceededEncoder 3
F33153Encoder 3: Identification errorEncoder 3
F33160Encoder 3: Analog sensor channel A failedEncoder 3
F33161Encoder 3: Analog sensor channel B failedEncoder 3
F33163Encoder 3: Analog sensor position value exceeds limit valueEncoder 3
A33400Encoder 3: Zero mark distance error (alarm threshold exceeded)Encoder 3
A33401Encoder 3: Zero mark failed (alarm threshold exceeded)Encoder 3
F33405Encoder 3: Temperature in the encoder evaluation exceededEncoder 3
A33407Encoder 3: Function limit reachedEncoder 3
A33410Encoder 3: Communication error (encoder and Sensor Module)Encoder 3
A33411Encoder 3: Encoder signals an internal alarm (detailed information)Encoder 3
A33412Encoder 3: Encoder signals an internal alarmEncoder 3
A33414Encoder 3: Signal level track C or D out of toleranceEncoder 3
N33415Encoder 3: Signal level track A or B outside tolerance (alarm)Encoder 3
A33418Encoder 3: Speed change not plausible (alarm)Encoder 3
A33419Encoder 3: Track A or B outside toleranceEncoder 3
A33421Encoder 3: Determined commutation position incorrect (alarm)Encoder 3
A33422Encoder 3: Pulses per revolution square-wave encoder outside tolerance bandwidthEncoder 3
A33429Encoder 3: Position difference hall sensor/track C/D and A/B too largeEncoder 3
A33431Encoder 3: Position deviation incremental/absolute too high (alarm)Encoder 3
A33432Encoder 3: Rotor position adaptation corrects deviationEncoder 3
A33442Encoder 3: Battery voltage alarm threshold reachedEncoder 3
A33443Encoder 3: Signal level track C/D outside tolerance (alarm)Encoder 3
A33460Encoder 3: Analog sensor channel A failedEncoder 3
A33461Encoder 3: Analog sensor channel B failedEncoder 3
A33462Encoder 3: Analog sensor no channel activeEncoder 3
A33463Encoder 3: Analog sensor position value exceeds limit valueEncoder 3
A33470Encoder 3: Encoder signals an internal error (X521.7)Encoder 3
F33500Encoder 3: Position tracking traversing range exceededEncoder 3
F33501Encoder 3: Position tracking encoder position outside tolerance windowEncoder 3
F33502Encoder 3: Encoder with measuring gear without valid signalsEncoder 3
F33503Encoder 3: Position tracking cannot be resetEncoder 3
A33700Encoder 3: Effectivity test does not supply the expected valueEncoder 3
N33800Encoder 3: Group signalEncoder 3
F33801Encoder 3 DRIVE-CLiQ: Sign-of-life missingEncoder 3
F33802Encoder 3: Time slice overflowEncoder 3
F33804Encoder 3: Sensor Module checksum errorEncoder 3
F33805Encoder 3: EEPROM checksum errorEncoder 3
F33806Encoder 3: Initialization errorEncoder 3
A33811Encoder 3: Encoder serial number changedEncoder 3
F33812Encoder 3: Requested cycle or RX-/TX timing not supportedEncoder 3
F33813Encoder 3: Hardware logic unit failedEncoder 3
F33820Encoder 3 DRIVE-CLiQ: Telegram errorEncoder 3
F33835Encoder 3 DRIVE-CLiQ: Cyclic data transfer errorEncoder 3
F33836Encoder 3 DRIVE-CLiQ: Send error for DRIVE-CLiQ dataEncoder 3
F33837Encoder 3 DRIVE-CLiQ: Component faultEncoder 3
F33845Encoder 3 DRIVE-CLiQ: Cyclic data transfer errorEncoder 3
F33850Encoder 3: Encoder evaluation internal software errorEncoder 3
F33851Encoder 3 DRIVE-CLiQ (CU): Sign-of-life missingEncoder 3
F33860Encoder 3 DRIVE-CLiQ (CU): Telegram errorEncoder 3
F33875Encoder 3: power supply voltage failedEncoder 3
F33885Encoder 3 DRIVE-CLiQ (CU): Cyclic data transfer errorEncoder 3
F33886Encoder 3 DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataEncoder 3
F33887Encoder 3 DRIVE-CLiQ (CU): Component faultEncoder 3
F33895Encoder 3 DRIVE-CLiQ (CU): Alternating cyclic data transfer errorEncoder 3
F33896Encoder 3 DRIVE-CLiQ (CU): Inconsistent component propertiesEncoder 3
F33899Encoder 3: Unknown faultEncoder 3
A33902Encoder 3: SPI-BUS error occurredEncoder 3
A33903Encoder 3: I2C-BUS error occurredEncoder 3
F33905Encoder 3: Encoder parameterization errorEncoder 3
F33912Encoder 3: Device combination is not permissibleEncoder 3
A33915Encoder 3: Encoder configuration errorEncoder 3
F33916Encoder 3: Encoder parameterization errorEncoder 3
A33920Encoder 3: Temperature sensor fault (motor)Encoder 3
A33930Encoder 3: Data logger has saved dataEncoder 3
A33940Encoder 3: Spindle sensor S1 voltage incorrectEncoder 3
F33950Encoder 3: Internal software errorEncoder 3
A33999Encoder 3: Unknown alarmEncoder 3
F34207VSM: Temperature fault threshold exceededVoltage Sensing Module
A34211VSM: Temperature alarm threshold exceededVoltage Sensing Module
N34800VSM: Group signalVoltage Sensing Module
F34801VSM DRIVE-CLiQ: Sign-of-life missingVoltage Sensing Module
F34802VSM: Time slice overflowVoltage Sensing Module
F34803VSM: Memory testVoltage Sensing Module
F34804VSM: CRCVoltage Sensing Module
F34805VSM: EEPROM checksum errorVoltage Sensing Module
F34806VSM: InitializationVoltage Sensing Module
A34807VSM: Sequence control time monitoringVoltage Sensing Module
F34820VSM DRIVE-CLiQ: Telegram errorVoltage Sensing Module
F34835VSM DRIVE-CLiQ: Cyclic data transfer errorVoltage Sensing Module
F34836VSM DRIVE-CLiQ: Send error for DRIVE-CLiQ dataVoltage Sensing Module
F34837VSM DRIVE-CLiQ: Component faultVoltage Sensing Module
F34845VSM DRIVE-CLiQ: Cyclic data transfer errorVoltage Sensing Module
F34850VSM: Internal software errorVoltage Sensing Module
F34851VSM DRIVE-CLiQ (CU): Sign-of-life missingVoltage Sensing Module
F34860VSM DRIVE-CLiQ (CU): Telegram errorVoltage Sensing Module
F34875VSM: power supply voltage failedVoltage Sensing Module
F34885VSM DRIVE-CLiQ (CU): Cyclic data transfer errorVoltage Sensing Module
F34886VSM DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataVoltage Sensing Module
F34887VSM DRIVE-CLiQ (CU): Component faultVoltage Sensing Module
F34895VSM DRIVE-CLiQ (CU): Alternating cyclic data transfer errorVoltage Sensing Module
F34896VSM DRIVE-CLiQ (CU): Inconsistent component propertiesVoltage Sensing Module
F34899VSM: Unknown faultVoltage Sensing Module
A34903VSM: I2C bus error occurredVoltage Sensing Module
A34904VSM: EEPROMVoltage Sensing Module
A34905VSM: Parameter accessVoltage Sensing Module
F34920VSM: overtemperature or temperature sensor faultVoltage Sensing Module
F34950VSM: Internal software errorVoltage Sensing Module
A34999VSM: Unknown alarmVoltage Sensing Module
F35000TM54F: Sampling time invalidTerminal Module TM54F
F35001TM54F: Parameter value invalidTerminal Module TM54F
F35002TM54F: Commissioning not possibleTerminal Module TM54F
F35003TM54F: Acknowledgment on the Control Unit is requiredTerminal Module TM54F
F35004TM54F: communication cycle invalidTerminal Module TM54F
F35005TM54F:parallel connection not supportedTerminal Module TM54F
F35006TM54F: drive groups invalidTerminal Module TM54F
F35009TM54F: Safety commissioning drive incompleteTerminal Module TM54F
F35011TM54F: Drive object number assignment illegalTerminal Module TM54F
A35012TM54F: Test stop for failsafe digital inputs/outputsTerminal Module TM54F
F35013TM54F: Test stop errorTerminal Module TM54F
A35014TM54F: Test stop for failsafe digital inputs/outputsTerminal Module TM54F
A35015TM54F: Motor/Hydraulic Module replaced or configuration inconsistentTerminal Module TM54F
A35016TM54F: Net data communication with drive not establishedTerminal Module TM54F
F35040TM54F: 24 V undervoltageTerminal Module TM54F
F35043TM54F: 24 V overvoltageTerminal Module TM54F
F35051TM54F: Defect in a monitoring channelTerminal Module TM54F
F35052TM54F: Internal hardware errorTerminal Module TM54F
F35053TM54F: Temperature fault threshold exceededTerminal Module TM54F
A35054TM54F: Temperature alarm threshold exceededTerminal Module TM54F
A35075TM54F: Error during internal communicationTerminal Module TM54F
A35080TM54F: Checksum error safety parametersTerminal Module TM54F
A35081TM54F: Static (steady state) 1 signal at the F-DI for safe acknowledgmentTerminal Module TM54F
F35150TM54F: Communication errorTerminal Module TM54F
F35151TM54F: Discrepancy errorTerminal Module TM54F
F35152TM54F: Internal software errorTerminal Module TM54F
A35200TM: Calibration dataTerminal Module
F35207TM: Temperature fault/alarm threshold channel 0 exceededTerminal Module
F35208TM: Temperature fault/alarm threshold channel 1 exceededTerminal Module
F35209TM: Temperature fault/alarm threshold channel 2 exceededTerminal Module
F35210TM: Temperature fault/alarm threshold channel 3 exceededTerminal Module
A35211TM: Temperature alarm threshold channel 0 exceededTerminal Module
A35212TM: Temperature alarm threshold channel 1 exceededTerminal Module
A35213TM: Temperature alarm threshold channel 2 exceededTerminal Module
A35214TM: Temperature alarm threshold channel 3 exceededTerminal Module
F35220TM: Frequency limit reached for signal outputTerminal Module
F35221TM: Setpoint - actual value deviation outside the tolerance rangeTerminal Module
A35222TM: Encoder pulse number not permissibleTerminal Module
A35223TM: Zero mark offset not permissibleTerminal Module
A35224TM: Zero mark synchronization interruptedTerminal Module
A35225TM: Zero mark synchronization held - encoder not in the ready stateTerminal Module
A35226TM: Tracks A/B are deactivatedTerminal Module
A35227EDS changeover/encoder data set change not supportedTerminal Module
A35228TM: Sampling time p4099[3] invalidTerminal Module
F35229TM: Time slice deactivatedTerminal Module
F35230TM: Hardware faultTerminal Module
A35231TM: Master control by PLC missingTerminal Module
A35232TM41: Zero mark no longer synchronous POWER ON requiredTerminal Module
F35233DRIVE-CLiQ component function not supportedTerminal Module
F35400TM: Temperature fault/alarm threshold channel 4 exceededTerminal Module
F35401TM: Temperature fault/alarm threshold channel 5 exceededTerminal Module
F35402TM: Temperature fault/alarm threshold channel 6 exceededTerminal Module
F35403TM: Temperature fault/alarm threshold channel 7 exceededTerminal Module
F35404TM: Temperature fault/alarm threshold channel 8 exceededTerminal Module
F35405TM: Temperature fault/alarm threshold channel 9 exceededTerminal Module
F35406TM: Temperature fault/alarm threshold channel 10 exceededTerminal Module
F35407TM: Temperature fault/alarm threshold channel 11 exceededTerminal Module
A35410TM: Temperature alarm threshold channel 4 exceededTerminal Module
A35411TM: Temperature alarm threshold channel 5 exceededTerminal Module
A35412TM: Temperature alarm threshold channel 6 exceededTerminal Module
A35413TM: Temperature alarm threshold channel 7 exceededTerminal Module
A35414TM: Temperature alarm threshold channel 8 exceededTerminal Module
A35415TM: Temperature alarm threshold channel 9 exceededTerminal Module
A35416TM: Temperature alarm threshold channel 10 exceededTerminal Module
A35417TM: Temperature alarm threshold channel 11 exceededTerminal Module
N35800TM: Group signalTerminal Module
F35801TM DRIVE-CLiQ: Sign-of-life missingTerminal Module
A35802TM: Time slice overflowTerminal Module
A35803TM: Memory testTerminal Module
F35804TM: CRCTerminal Module
F35805TM: EEPROM checksum errorTerminal Module
A35807TM: Sequence control time monitoringTerminal Module
F35820TM DRIVE-CLiQ: Telegram errorTerminal Module
F35835TM DRIVE-CLiQ: Cyclic data transfer errorTerminal Module
F35836TM DRIVE-CLiQ: Send error for DRIVE-CLiQ dataTerminal Module
F35837PTM DRIVE-CLiQ: Component faultTerminal Module
F35845TM DRIVE-CLiQ: Cyclic data transfer errorTerminal Module
F35850TM: Internal software errorTerminal Module
F35851TM DRIVE-CLiQ (CU): Sign-of-life missingTerminal Module
F35860TM DRIVE-CLiQ (CU): Telegram errorTerminal Module
F35875TM: power supply voltage failedTerminal Module
F35885TM DRIVE-CLiQ (CU): Cyclic data transfer errorTerminal Module
F35886TM DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataTerminal Module
F35887TM DRIVE-CLiQ (CU): Component faultTerminal Module
F35895TM DRIVE-CLiQ (CU): Alternating cyclic data transfer errorTerminal Module
F35896TM DRIVE-CLiQ (CU): Inconsistent component propertiesTerminal Module
F35899TM: Unknown faultTerminal Module
A35903TM: I2C bus error occurredTerminal Module
A35904TM: EEPROMTerminal Module
A35905TM: Parameter accessTerminal Module
A35906TM: 24 V power supply missingTerminal Module
A35907TM: Hardware initialization errorTerminal Module
A35910TM: Module overtemperatureTerminal Module
A35911TM: Clock synchronous operation sign-of-life missingTerminal Module
A35920TM: Error temperature sensor channel 0Terminal Module
A35921TM: Error temperature sensor channel 1Terminal Module
A35922TM: Error temperature sensor channel 2Terminal Module
A35923TM: Error temperature sensor channel 3Terminal Module
A35924TM: Error temperature sensor channel 4Terminal Module
A35925TM: Error temperature sensor channel 5Terminal Module
A35926TM: Error temperature sensor channel 6Terminal Module
A35927TM: Error temperature sensor channel 7Terminal Module
A35928TM: Error temperature sensor channel 8Terminal Module
A35929TM: Error temperature sensor channel 9Terminal Module
A35930TM: Error temperature sensor channel 10Terminal Module
A35931TM: Error temperature sensor channel 11Terminal Module
F35950TM: Internal software errorTerminal Module
A35999TM: Unknown alarmTerminal Module
F36207Hub: Overtemperature componentDRIVE-CLiQ Hub
A36211Hub: Overtemperature alarm componentDRIVE-CLiQ Hub
F36214Hub: overvoltage fault 24 V supplyDRIVE-CLiQ Hub
F36216Hub: undervoltage fault 24 V supplyDRIVE-CLiQ Hub
A36217Hub: undervoltage alarm 24 V supplyDRIVE-CLiQ Hub
N36800Hub: Group signalDRIVE-CLiQ Hub
A36801Hub DRIVE-CLiQ: Sign-of-life missingDRIVE-CLiQ Hub
A36802Hub: Time slice overflowDRIVE-CLiQ Hub
F36804Hub: Checksum errorDRIVE-CLiQ Hub
F36805Hub: EEPROM checksum incorrectDRIVE-CLiQ Hub
F36820Hub DRIVE-CLiQ: Telegram errorDRIVE-CLiQ Hub
F36835Hub DRIVE-CLiQ: Cyclic data transfer errorDRIVE-CLiQ Hub
F36836Hub DRIVE-CLiQ: Send error for DRIVE-CLiQ dataDRIVE-CLiQ Hub
F36837Hub DRIVE-CLiQ: Component faultDRIVE-CLiQ Hub
F36845Hub DRIVE-CLiQ: Cyclic data transfer errorDRIVE-CLiQ Hub
F36851Hub DRIVE-CLiQ (CU): Sign-of-life missingDRIVE-CLiQ Hub
F36860Hub DRIVE-CLiQ (CU): Telegram errorDRIVE-CLiQ Hub
F36875HUB: power supply voltage failedDRIVE-CLiQ Hub
F36885Hub DRIVE-CLiQ (CU): Cyclic data transfer errorDRIVE-CLiQ Hub
F36886Hub DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataDRIVE-CLiQ Hub
F36887Hub DRIVE-CLiQ (CU): Component faultDRIVE-CLiQ Hub
F36895Hub DRIVE-CLiQ (CU): Alternating cyclic data transfer errorDRIVE-CLiQ Hub
F36896Hub DRIVE-CLiQ (CU): Inconsistent component propertiesDRIVE-CLiQ Hub
F36899Hub: Unknown faultDRIVE-CLiQ Hub
F36950Hub: Internal software errorDRIVE-CLiQ Hub
A36999Hub: Unknown alarmDRIVE-CLiQ Hub
F37001HF Damping Module: overcurrentHF Damping Module
F37002HF Damping Module: Damping voltage too highHF Damping Module
F37003HF Damping Module: Damping voltage not establishedHF Damping Module
F37004HF Damping Module: Heat sink overtemperatureHF Damping Module
F37005HF Damping Module: I2t overloadHF Damping Module
F37012HF Damping Module: Heat sink temperature sensor wire breakageHF Damping Module
F37013HF Damping Module: Heat sink temperature sensor short-circuitHF Damping Module
F37024HF Damping Module: Overtemperature thermal modelHF Damping Module
F37025HF Damping Module: Chip overtemperatureHF Damping Module
A37034HF Damping Module: Internal overtemperatureHF Damping Module
F37036HF Damping Module: Internal overtemperatureHF Damping Module
F37040HF Damping Module: 24 V undervoltageHF Damping Module
A37041HF Damping Module: 24 V undervoltage alarmHF Damping Module
F37043HF Damping Module: 24 V overvoltageHF Damping Module
A37044HF Damping Module: 24 V overvoltage alarmHF Damping Module
F37045HF Damping Module: Supply undervoltageHF Damping Module
A37049HF Damping Module: Internal fan defectiveHF Damping Module
F37050HF Damping Module: 24 V overvoltage faultHF Damping Module
F37052HF Damping Module: EEPROM data errorHF Damping Module
A37056HF Damping Module: Heat sink overtemperatureHF Damping Module
A37310HF Choke Module: OvertemperatureHF Damping Module
F37311HF Choke Module: Heat sink overtemperatureHF Damping Module
A37312HF Choke Module: Overtemperature or fan failureHF Damping Module
F37313HF Choke Module: Overtemperature or fan failureHF Damping Module
A37502HF Damping Module: Damping voltage too highHF Damping Module
N37800HF Damping Module: Group signalHF Damping Module
A37801HF Damping Module: Sign-of-life missingHF Damping Module
F37802HF Damping Module: time slice overflowHF Damping Module
F37804HF Damping Module: CRCHF Damping Module
F37805HF Damping Module: EEPROM checksum incorrectHF Damping Module
F37820HF Damping Module: Telegram errorHF Damping Module
F37835HF Damping Module: Cyclic data transmission errorHF Damping Module
F37836HF Damping Module: Send error for DRIVE-CLiQ dataHF Damping Module
F37837HF Damping Module: Component faultedHF Damping Module
F37845HF Damping Module: Cyclic data transmission errorHF Damping Module
F37850HF Damping Module: Internal software errorHF Damping Module
F37851HF Damping Module (CU): Sign-of-life missingHF Damping Module
F37860HF Damping Module (CU): Telegram errorHF Damping Module
F37875HF Damping Module: power supply voltage failedHF Damping Module
F37885HF Damping Module (CU): Cyclic data transmission errorHF Damping Module
F37886HF Damping Module (CU): Error when sending DRIVE-CLiQ dataHF Damping Module
F37887HF Damping Module (CU): Component faultedHF Damping Module
F37895HF Damping Module (CU): Alternating cyclic data transmission errorHF Damping Module
F37896HF Damping Module (CU): Component properties inconsistentHF Damping Module
F37899HF Damping Module: Unknown faultHF Damping Module
F37903HF Damping Module: I2C bus error occurredHF Damping Module
F37950HF Damping Module: Internal software errorHF Damping Module
A37999HF Damping Module: Unknown alarmHF Damping Module
F40000Fault at DRIVE-CLiQ socket X100Controller Extension CX32
F40001Fault at DRIVE-CLiQ socket X101Controller Extension CX32
F40002Fault at DRIVE-CLiQ socket X102Controller Extension CX32
F40003Fault at DRIVE-CLiQ socket X103Controller Extension CX32
F40004Fault at DRIVE-CLiQ socket X104Controller Extension CX32
F40005Fault at DRIVE-CLiQ socket X105Controller Extension CX32
A40100Alarm at DRIVE-CLiQ socket X100Controller Extension CX32
A40101Alarm at DRIVE-CLiQ socket X101Controller Extension CX32
A40102Alarm at DRIVE-CLiQ socket X102Controller Extension CX32
A40103Alarm at DRIVE-CLiQ socket X103Controller Extension CX32
A40104Alarm at DRIVE-CLiQ socket X104Controller Extension CX32
A40105Alarm at DRIVE-CLiQ socket X105Controller Extension CX32
F40799CX32: Configured transfer end time exceededController Extension CX32
F40801CX32 DRIVE-CLiQ: Sign-of-life missingController Extension CX32
F40820CX32 DRIVE-CLiQ: Telegram errorController Extension CX32
F40825CX32 DRIVE-CLiQ: Supply voltage failedController Extension CX32
F40835CX32 DRIVE-CLiQ: Cyclic data transfer errorController Extension CX32
F40836CX32 DRIVE-CLiQ: Send error for DRIVE-CLiQ dataController Extension CX32
F40837CX32 DRIVE-CLiQ: Component faultController Extension CX32
F40845CX32 DRIVE-CLiQ: Cyclic data transfer errorController Extension CX32
F40851CX32 DRIVE-CLiQ (CU): Sign-of-life missingController Extension CX32
F40860CX32 DRIVE-CLiQ (CU): Telegram errorController Extension CX32
F40875CX32 DRIVE-CLiQ (CU): Supply voltage failedController Extension CX32
F40885CX32 DRIVE-CLiQ (CU): Cyclic data transfer errorController Extension CX32
F40886CX32 DRIVE-CLiQ (CU): Error when sending DRIVE-CLiQ dataController Extension CX32
F40887CX32 DRIVE-CLiQ (CU): Component faultController Extension CX32
F40895CX32 DRIVE-CLiQ (CU): Cyclic data transfer errorController Extension CX32
F49150Cooling unit: Fault occurredSINAMICS GM/SM/GL
F49151Cooling unit: Conductivity has exceeded the fault thresholdSINAMICS GM/SM/GL
F49152Cooling unit: ON command feedback signal missingSINAMICS GM/SM/GL
F49153Cooling unit: Liquid flow too lowSINAMICS GM/SM/GL
F49154Cooling unit: Liquid leak is presentSINAMICS GM/SM/GL
F49155Cooling unit: Power Stack Adapter, firmware version too oldSINAMICS GM/SM/GL
F49156Cooling unit: Cooling liquid temperature has exceeded the fault thresholdSINAMICS GM/SM/GL
A49170Cooling unit: Alarm has occurredSINAMICS GM/SM/GL
A49171Cooling unit: Conductivity has exceeded the alarm thresholdSINAMICS GM/SM/GL
A49172Cooling unit: Conductivity actual value is not validSINAMICS GM/SM/GL
A49173Cooling unit: Cooling liquid temperature has exceeded the alarm thresholdSINAMICS GM/SM/GL
F49200Excitation group signal faultSINAMICS GM/SM/GL
A49201Excitation group signal alarmSINAMICS GM/SM/GL
A49204Excitation switch-off alarmSINAMICS GM/SM/GL
A49205Excitation: incorrect parameterization of the brushless exciterSINAMICS GM/SM/GL
A49920Protective breaker main circuit trippedSINAMICS GM/SM/GL
A49921Protective breaker redundant main circuit trippedSINAMICS GM/SM/GL
A49922Protective breaker 24 V circuit has trippedSINAMICS GM/SM/GL
A49923Protective breaker terminal strip 24 V circuit has trippedSINAMICS GM/SM/GL
A49924Protective breaker power unit supply circuit trippedSINAMICS GM/SM/GL
A49926Protective breaker synchronizing voltage trippedSINAMICS GM/SM/GL
A49927Protective breaker auxiliary fan circuit has trippedSINAMICS GM/SM/GL
A49933Protective breaker excitation 230 V AC circuit trippedSINAMICS GM/SM/GL
A49934Protective breaker output cooling unit 230 V AC circuit trippedSINAMICS GM/SM/GL
A49935Protective breaker power unit door solenoids 24 V circuit has trippedSINAMICS GM/SM/GL
A49936Prot. breaker lighting supply/socket outlets 230V AC cct has trippedSINAMICS GM/SM/GL
A49937UPS not readySINAMICS GM/SM/GL
A49938UPS battery operationSINAMICS GM/SM/GL
A49939UPS battery dischargedSINAMICS GM/SM/GL
A49940Protective breaker tripped PU supply 400 V circuitSINAMICS GM/SM/GL
A49941Protective breaker anti-condensation heating trippedSINAMICS GM/SM/GL
A49942Protective breaker SITOP supply circuit trippedSINAMICS GM/SM/GL
A49998Recorder trigger event occurredSINAMICS GM/SM/GL
A50002COMM BOARD: Alarm 2Communication Board
A50003COMM BOARD: Alarm 3Communication Board
A50004COMM BOARD: Alarm 4Communication Board
A50005COMM BOARD: Alarm 5Communication Board
A50006COMM BOARD: Alarm 6Communication Board
A50007COMM BOARD: Alarm 7Communication Board
A50008COMM BOARD: Alarm 8Communication Board
A50011EtherNetIP/COMM BOARD: configuration errorCommunication Board
Showing 60 of 1,484 codes

Codes and names from the SINAMICS S120/S150 List Manual. Guides written and reviewed by AutomIQ repair technicians.

SINAMICS S120 repair

Motor Module or Line Module faulted?

  • Free evaluation and written quote
  • Tested on our own test jigs
  • Exchange units when in stock
Send this unit in Ask a technician

SINAMICS S120 fault guides

  • F07011Drive: Motor overtemperature
  • F07900Drive: Motor blocked/speed controller at its limit
  • F30001Power unit: Overcurrent
  • F30002Power unit: DC link voltage overvoltage
  • F30003Power unit: DC link voltage undervoltage
  • F30004Power unit: Overtemperature heat sink AC inverter
  • F30005Power unit: Overload I2t
  • F30011Power unit: Line phase failure in main circuit
All brands

Drives hold dangerous voltage after power-off. Checks should only be done by qualified personnel, with power isolated and the DC link discharged.

Machine down? Let's get it running again.

Request a Repair +1 343-507-0006
Calls & WhatsApp
+1 343-507-0006
Turnaround
24–72 hr typical
Exchange units
1–2 business days once yours arrives
Fault codes
2,364 explained
AutomIQ Automation & Drive Services

Servo drive, motor and industrial electronics repair for Canada and the USA.

  • info@automiqautomation.com
  • +1 343-507-0006
  • 1301 Matheson Blvd E, Mississauga, ON L4W 1R1 Directions

Repair

  • Servo Drive Repair
  • Servo Motor Repair
  • Encoder Repair
  • CNC Control Repair
  • Exchange Program
  • On-site Service

Shop Parts

  • Servo Drives
  • Servo Motors
  • PLCs & I/O
  • CNC Controls
  • Legacy & Obsolete
  • Sell Your Surplus

Brands

  • Siemens
  • Rexroth Indramat
  • Allen-Bradley
  • Fanuc
  • All brands

Company

  • Fault Code Library
  • Industries
  • Service Areas
  • International Orders
  • About
  • Contact
  • Request a Quote

© 2026 AutomIQ Automation & Drive Services

PrivacyTermsWarrantySitemapBrochureLine CardCanada site

AutomIQ Automation & Drive Services is an independent repair and surplus parts provider. We are not affiliated with, authorized by, or endorsed by any manufacturer named on this site, and we are not an authorized distributor or service centre unless stated. All brand names, logos, model numbers and trademarks belong to their respective owners and are used only to identify compatible equipment. New and surplus parts sold by us may not include the manufacturer's warranty; our own warranty applies as stated. Product images may be representative.