F
Fanuc αi Fault Codes & Alarms
All 139 codes. Fanuc αi servo (SV) and spindle (SP) alarms for Series 30i, 31i, 32i and 0i-D, with the matching amplifier display code and the 16i / 18i / 21i / 0i alarm number.
| Code | Name | Area | Guide |
|---|---|---|---|
| SV0361 | Pulsecoder phase error (built-in) | Pulsecoder (encoder) / feedback | |
| SV0364 | Soft phase alarm (built-in) | Pulsecoder (encoder) / feedback | |
| SV0365 | LED error (built-in) | Pulsecoder (encoder) / feedback | |
| SV0366 | Pulse error (built-in) | Pulsecoder (encoder) / feedback | |
| SV0367 | Count error (built-in) | Pulsecoder (encoder) / feedback | |
| SV0368 | Serial data error (built-in) | Pulsecoder (encoder) / feedback | Full guide |
| SV0369 | Data transfer error (built-in) | Pulsecoder (encoder) / feedback | |
| SV0380 | LED error (separate) | Pulsecoder (encoder) / feedback | |
| SV0381 | Pulsecoder phase error (separate) | Pulsecoder (encoder) / feedback | |
| SV0382 | Count error (separate) | Pulsecoder (encoder) / feedback | |
| SV0383 | Pulse error (separate) | Pulsecoder (encoder) / feedback | |
| SV0384 | Soft phase alarm (separate) | Pulsecoder (encoder) / feedback | |
| SV0385 | Serial data error (separate) | Pulsecoder (encoder) / feedback | |
| SV0386 | Data transfer error (separate) | Pulsecoder (encoder) / feedback | |
| SV0387 | Sensor error (separate) | Pulsecoder (encoder) / feedback | |
| SV0401 | V ready off | CNC servo monitoring | Full guide |
| SV0417 | Invalid servo parameter | CNC servo monitoring | |
| SV0421 | Excessive semi-full error | CNC servo monitoring | |
| SV0430 | Servo motor overheat | CNC servo monitoring | |
| SV0431 | Converter: main circuit overload | Power supply (PSM) | |
| SV0432 | Converter: control power supply undervoltage | Power supply (PSM) | |
| SV0433 | Converter: DC link undervoltage | Power supply (PSM) | Full guide |
| SV0434 | Inverter: control power supply undervoltage | Servo amplifier (SVM) | |
| SV0435 | Inverter: DC link undervoltage | Servo amplifier (SVM) | |
| SV0436 | Soft thermal (OVC) | CNC servo monitoring | Full guide |
| SV0437 | Converter: input circuit overcurrent | Power supply (PSM) | |
| SV0438 | Inverter: motor current alarm | Servo amplifier (SVM) | Full guide |
| SV0439 | Converter: DC link overvoltage | Power supply (PSM) | |
| SV0440 | Converter: Excessive deceleration power | Power supply (PSM) | |
| SV0441 | Current offset error | CNC servo monitoring | |
| SV0442 | Converter: DC link precharge failure | Power supply (PSM) | Full guide |
| SV0443 | Converter: cooling fan stopped | Power supply (PSM) | Full guide |
| SV0444 | Inverter: internal cooling fan stopped | Servo amplifier (SVM) | Full guide |
| SV0445 | Soft disconnection alarm | Pulsecoder (encoder) / feedback | |
| SV0447 | Hard disconnection alarm (separate) | Pulsecoder (encoder) / feedback | |
| SV0448 | Feedback mismatch alarm | CNC servo monitoring | |
| SV0449 | Inverter: IPM alarm | Servo amplifier (SVM) | Full guide |
| SV0453 | α Pulsecoder soft disconnection | Pulsecoder (encoder) / feedback | |
| SV0600 | Inverter: DC link current alarm | Servo amplifier (SVM) | |
| SV0601 | Inverter: cooling fan stopped of the radiator | Servo amplifier (SVM) | |
| SV0602 | Inverter: overheat | Servo amplifier (SVM) | |
| SV0603 | Inverter: IPM alarm (OH) | Servo amplifier (SVM) | |
| SV0604 | Communication error between amplifiers | Servo amplifier (SVM) | |
| SV0605 | Converter: Excessive regenerative power | Power supply (PSM) | |
| SV0606 | Converter: cooling fan stopped of the radiator | Power supply (PSM) | |
| SV0607 | Open phase in the converter main power supply | Power supply (PSM) | |
| SV0654 | DB relay error | CNC servo monitoring | |
| SP9001 | Motor overheat | Spindle amplifier (SPM) | |
| SP9002 | Excessive speed deviation | Spindle amplifier (SPM) | |
| SP9003 | DC link fuse blown | Spindle amplifier (SPM) | |
| SP9004 | Open phase in the converter main power supply | Power supply (PSM) | |
| SP9006 | Temperature sensor disconnected | Spindle amplifier (SPM) | |
| SP9007 | Excessive speed | Spindle amplifier (SPM) | |
| SP9009 | Main circuit overload/IPM overheat | Spindle amplifier (SPM) | Full guide |
| SP9010 | Low power supply input voltage | Spindle amplifier (SPM) | |
| SP9011 | Converter: DC link overvoltage | Power supply (PSM) | |
| SP9012 | DC link overcurrent/IPM alarm | Spindle amplifier (SPM) | Full guide |
| SP9014 | Amplifier ID not registered | Spindle amplifier (SPM) | |
| SP9015 | Output switching/spindle switching alarm | Spindle amplifier (SPM) | |
| SP9016 | RAM error | Spindle amplifier (SPM) | |
| SP0017 | Amplifier ID data error | Spindle amplifier (SPM) | |
| SP9021 | Position sensor polarity setting incorrect | Spindle amplifier (SPM) | |
| SP9022 | Spindle amplifier current overload | Spindle amplifier (SPM) | |
| SP9027 | Position coder disconnected | Spindle amplifier (SPM) | |
| SP9029 | Short-period overload | Spindle amplifier (SPM) | |
| SP9030 | Overcurrent in the converter input circuit | Power supply (PSM) | |
| SP9031 | Motor lock alarm | Spindle amplifier (SPM) | |
| SP9032 | Serial communication LSI RAM error | Spindle amplifier (SPM) | |
| SP9033 | Converter: DC link precharge failure | Power supply (PSM) | |
| SP9034 | Parameter data out of the specifiable range | Spindle amplifier (SPM) | |
| SP9035 | Gear ratio parameter error | Spindle amplifier (SPM) | |
| SP9036 | Error counter overflow | Spindle amplifier (SPM) | |
| SP9037 | Speed detector parameter error | Spindle amplifier (SPM) | |
| SP9041 | Position coder one-rotation signal detection error | Spindle amplifier (SPM) | |
| SP9042 | Position coder one-rotation signal not detected | Spindle amplifier (SPM) | |
| SP9043 | Position coder signal for differential speed mode disconnected | Spindle amplifier (SPM) | |
| SP9046 | Position sensor one-rotation signal detection error during thread cutting | Spindle amplifier (SPM) | |
| SP9047 | Position coder signal error | Spindle amplifier (SPM) | |
| SP9049 | Overflow of converted motor speed for differential spindle speed control | Spindle amplifier (SPM) | |
| SP9050 | Excessive speed command calculation value in spindle synchronization | Spindle amplifier (SPM) | |
| SP9051 | Converter: DC link undervoltage | Power supply (PSM) | |
| SP9052 | ITP signal error I | Spindle amplifier (SPM) | |
| SP9053 | ITP signal error II | Spindle amplifier (SPM) | |
| SP9054 | Current overload alarm | Spindle amplifier (SPM) | |
| SP9055 | Abnormal switching status of power leads | Spindle amplifier (SPM) | |
| SP9056 | Internal cooling fan stopped | Spindle amplifier (SPM) | |
| SP9057 | Converter: excessive deceleration power | Power supply (PSM) | |
| SP9058 | Converter: main circuit overload | Power supply (PSM) | |
| SP9059 | Converter: cooling fan stopped | Power supply (PSM) | |
| SP9061 | Excessive semi-closed loop/closed loop position error alarm | Spindle amplifier (SPM) | |
| SP9065 | Abnormal travel distance in magnetic pole determination operation | Spindle amplifier (SPM) | |
| SP9066 | Communication alarm between spindle and amplifier | Spindle amplifier (SPM) | |
| SP9067 | Reference position return command in the EGB mode | Spindle amplifier (SPM) | |
| SP9069 | Safety speed exceeded | Spindle amplifier (SPM) | |
| SP9070 | Abnormal axis data | Spindle amplifier (SPM) | |
| SP9071 | Abnormal safety parameter | Spindle amplifier (SPM) | |
| SP9072 | Motor speed mismatch | Spindle amplifier (SPM) | |
| SP9073 | Motor sensor disconnected | Spindle amplifier (SPM) | Full guide |
| SP9074 | CPU test alarm | Spindle amplifier (SPM) | |
| SP9075 | CRC test alarm | Spindle amplifier (SPM) | |
| SP9076 | Safety function not executed | Spindle amplifier (SPM) | |
| SP9077 | Axis number mismatch | Spindle amplifier (SPM) | |
| SP9078 | Safety parameter mismatch | Spindle amplifier (SPM) | |
| SP9079 | Abnormal initial test operation | Spindle amplifier (SPM) | |
| SP9080 | Destination amplifier error in inter-spindle amplifier communication | Spindle amplifier (SPM) | |
| SP9081 | Motor sensor one-rotation signal detection error | Spindle amplifier (SPM) | |
| SP9082 | Motor sensor one-rotation signal not detected | Spindle amplifier (SPM) | |
| SP9083 | Motor sensor signal error | Spindle amplifier (SPM) | |
| SP9084 | Spindle sensor disconnected | Spindle amplifier (SPM) | |
| SP9085 | Spindle sensor one-rotation signal detection error | Spindle amplifier (SPM) | |
| SP9086 | Spindle sensor one-rotation signal not detected | Spindle amplifier (SPM) | |
| SP9087 | Spindle sensor signal error | Spindle amplifier (SPM) | |
| SP9088 | Cooling fan stopped of the radiator | Spindle amplifier (SPM) | |
| SP9089 | Sub module SM (SSM) error | Spindle amplifier (SPM) | |
| SP9090 | Unexpected rotation alarm | Spindle amplifier (SPM) | |
| SP9091 | Pole position count miss alarm | Spindle amplifier (SPM) | |
| SP9092 | Velocity command-dependent overspeed alarm | Spindle amplifier (SPM) | |
| SP9110 | Communication error between amplifiers | Spindle amplifier (SPM) | |
| SP9111 | Converter: control power supply low voltage | Power supply (PSM) | |
| SP9112 | Converter: excessive regenerative power | Power supply (PSM) | |
| SP9113 | Converter: cooling fan stopped of the radiator | Power supply (PSM) | |
| SP9120 | Communication data alarm | Spindle amplifier (SPM) | |
| SP9121 | Communication data alarm | Spindle amplifier (SPM) | |
| SP9122 | Communication data alarm | Spindle amplifier (SPM) | |
| SP9123 | Spindle switching circuit error | Spindle amplifier (SPM) | |
| SP9124 | Invalid learning control velocity command | Spindle amplifier (SPM) | |
| SP9125 | Invalid dynamic characteristic compensation degree | Spindle amplifier (SPM) | |
| SP9127 | Invalid learning cycle | Spindle amplifier (SPM) | |
| SP9128 | Excessive speed deviation alarm in spindle synchronization | Spindle amplifier (SPM) | |
| SP9129 | Excessive position error alarm in spindle synchronization | Spindle amplifier (SPM) | |
| SP9130 | Speed polarity error in torque tandem operation | Spindle amplifier (SPM) | |
| SP9131 | Spindle adjustment function alarm | Spindle amplifier (SPM) | |
| SP9132 | Serial data error | Spindle amplifier (SPM) | |
| SP9133 | Data transfer error | Spindle amplifier (SPM) | |
| SP9134 | Soft phase alarm | Spindle amplifier (SPM) | |
| SP9137 | Device communication error | Spindle amplifier (SPM) | |
| SP9139 | Pulse error alarm | Spindle amplifier (SPM) | |
| SP9140 | Count error alarm | Spindle amplifier (SPM) | |
| SP9141 | Serial sensor one-rotation signal not detected | Spindle amplifier (SPM) |
Showing 60 of 139 codes
Codes and names from the FANUC αi series Maintenance Manual. Guides written and reviewed by AutomIQ repair technicians.